ANALYSIS OF THE INFLUENCE OF VARIATIONS IN CURRENT OF THE SMAW WELDING METHOD ON STAINLESS STEEL 304 MATERIAL ON MICRO STRUCTURES AND BENDING TESTS
Peralatan di industri tidak terlepas dengan bahan baku logam, untuk itu bahan baku logam tidak dapat dipisakan dengan hal penyambungan. Salah satu proses penyambungan yang sering digunakan adalah proses pengelasan SMAW (Shield Metal Arc Welding. Pada perusahaan PT Unilever Indonesia Tbk, pada industri pembuatan sabun batang (Personal Wash). Proses pencampuran chip sabun, warna dan parfum dilakukan oleh pengaduk (blade) menggunakan bahan logam stainless steel, dengan chip sabun yang berat, blade pengaduk sering mengalami patah terkena beban yang berat walaupun sudah dilakukan penyambungan dengan pengelasan. Tujuan dari penelitian ini adalah untuk mengetahui apakah ada pengaruh variasi arus pada material Stainless steel 304 terhadap Struktur Micro dan pengujian bending. Penelitian ini merupakan penelitian eksperimen. Dalam penelitian ini plat stainless steel 304 akan dilas dengan metode SMAW dengan elektroda NSN-308 dengan diameter 3,2 mm serta menggunakan arus 100, 115, dan 130 A. kemudian dilakukan pembentukan spesimen serta dilakukan uji Struktur Micro dan kekuatan bending memakai standart ATSM E290. Data hasil eksperimen dianalisis dengan metode one way anova dan uji-t. Hasil dari penelitian ini ialah terdapat pengaruh signifikan pada hasil variasi arus dan diameter elektroda pada material stainless steel 304 terhadap Struktur Micro dan kekuatan bending. Perubahan struktur Micro yang mempunyai hasil foto micro yang baik yaitu memiliki fasa ferrite yang bagus adalah pada variasi arus pengelasan 115 A. Nilai bending tertinggi ialah 1288.730 N/mm2 variasi arus 115 A serta nilai kekuatan bending terendah ialah 1217.397 N/mm2 variasi arus 100 A.
Kata Kunci : Stainless Steel 304, Struktur Micro dan Bending, SMAW, Kuat Arus
Equipment in the industry is inseparable from metal raw materials, for that metal raw materials cannot be separated from the connection. One of the connection processes that is often used is the SMAW (Shield Metal Arc Welding) welding process. At the company PT Unilever Indonesia Tbk, in the industry of making bar soap (Personal Wash). The process of mixing soap chips, colors and perfumes is carried out by a stirrer (blade) using stainless steel metal material, with heavy soap chips, the stirrer blade is often broken by heavy loads even though welding has been done. The purpose of this study is to determine whether there is an effect of current variation on 304 Stainless steel material on Micro Structure and bending testing. This research is an experimental research. In this study, 304 stainless steel plate will be welded by SMAW method with NSN-308 electrode with a diameter of 3.2 mm and using a current of 100, 115, and 130 A. then specimen formation is carried out and Micro Structure test and bending strength using ATSM E290 standard. The experimental data were analyzed by one way anova method and t-test. The results of this study are that there is a significant effect on the results of variations in current and electrode diameter in 304 stainless steel material on Micro Structure and bending strength. Micro structure changes that have good micro photo results, namely having a good ferrite phase, are in the 115 A welding current variation. The highest bending value is 1288.730 N/mm2 current variation 115 A and the lowest bending strength value is 1217.397 N/mm2 current variation 100 A.
Keywords: Stainless Steel 304, Micro Structure and Bending, SMAW, Current Streng
th