PENGARUH METODE PEMOTONGAN PLAT BAJA ST37 TERHADAP KEKUATAN TARIK
THE EFFECT OF CUTTING METHODS ON THE TENSILE STRENGTH OF ST37 STEEL PLATES
Baja ST37 sering digunakan dalam industri, namun metode pemotongan yang berbeda dapat mempengaruhi kekuatan tariknya. Penelitian ini bertujuan untuk mengetahui pengaruh metode pemotongan terhadap kekuatan tarik baja ST37. Metode pemotongan yang digunakan meliputi gas cutting, gerinda dan laser cutting. Baja ST37 dipilih karena sifat mekaniknya yang baik serta penggunaannya yang luas di industri konstruksi dan manufaktur. Fokus utama adalah menganalisis pengaruh variasi metode pemotongan baja ST37 dengan ketebalan 4 mm.
Metode yang digunakan adalah pengujian tarik pada baja ST37 dengan ukurann dimensi sesuai standar ASTM E8M. Variabel bebas berupa metode pemotongan menngunakan gas cutting, gerinda dan laser cutting sedangkan variabel terikat yaitu pengaruh metode pemotongan terhadap sifat mekanis baja ST37 yaitu kekuatan tarik dengan menggunakan mesin uji tarik (tensile test machine).
Hasil pengujian menunjukkan bahwa metode pemotongan mempengaruhi nilai kekuatan tarik material. Pemotongan dengan gas cutting menghasilkan tegangan tarik rata-rata tertinggi sebesar 407,7 MPa, diikuti oleh gerinda sebesar 387,3 MPa, dan laser cutting sebesar 375,5 MPa. Sementara itu, regangan rata-rata tertinggi diperoleh dari metode laser cutting sebesar 46,64%, menunjukkan bahwa semua metode masih mempertahankan keuletan material.
Kata Kunci : baja ST37, pemotongan logam, gas cutting, laser cutting, gerinda, kekuatan tarik.
ST37 steel is commonly used in industry, but different cutting methods can affect its tensile strength. This research aims to determine the effect of cutting methods on the tensile strength of ST37 steel. The cutting methods used in this study include gas cutting, grinding, and laser cutting. ST37 steel was chosen due to its good mechanical properties and wide application in construction and manufacturing industries. The main focus is to analyze the influence of various cutting methods on ST37 steel with a thickness of 4 mm.
The method used involved tensile testing on ST37 steel specimens with dimensions in accordance with ASTM E8M standards. The independent variable is the cutting method (gas cutting, grinding, and laser cutting), while the dependent variable is the mechanical property of ST37 steel, specifically tensile strength, tested using a tensile testing machine.
The test results show that the cutting method affects the tensile strength of the material. Gas cutting produced the highest average tensile stress of 407,7 MPa, followed by grinding at 387,3 MPa, and laser cutting at 375,5 MPa. Meanwhile, the highest average strain was obtained from the laser cutting method at 46.64%, indicating that all methods still retained the material’s ductility.
Keywords: ST37 steel, metal cutting, gas cutting, laser cutting, grinding, tensile strength.