Sepeda motor merupakan salah satu alat transportasi yang sering digunakan masyarakat yang mana jumlahnya semakin meningkat setiap tahunnya. Dengan adanya peningkatan jumlah kendaraan bermotor, maka secara tidak langsung jumlah konsumsi bahan bakar pun akan ikut meningkat. Untuk mengatasi permasalahan tersebut diperlukan cara lain agar dapat menghemat bakar namun dengan cara sederhana serta bahan murah yang dapat dengan mudah ditemukan. Salah cara yang dapat digunakan adalah dengan menggunakan ferrite magnet untuk menghemat bahan bakar kendaraan. Penelitian ini, bertujuan untuk mengetahui pengaruh pemasangan ferrite magnet pada fuel hose terhadap performa four stroke engine 125 cc yang meliputi torsi, daya efektif, konsumsi bahan bakar dan emisi gas buang yang dihasilkan oleh kendaraan.
Metode yang digunakan dalam penelitian ini berdasarkan standar SAE J1349 (pengukuran torsi dan daya), standar SNI 7554:2010 (pengukuran emisi gas buang), dan standar SNI 19-7118.3-2005 (pengukuran konsumsi bahan bakar) yang menggunakan metode pengujian kecepatan berubah dengan katup (throttle) terbuka penuh. Pengujian dilakukan pada putaran 3000-9000 RPM dengan rentang 500 RPM untuk setiap pengambilan datanya. Instrumen penelitian yang akan digunakan pada penelitian ini adalah inertia chassis dynamometer, exhaust gas analyzer, oxygen sensor, tachometer, fuel flow meter, 4 in 1 multi- function environment meter, dan stopwatch.
Dari penelitian ini diketahui bahwa terdapat pengaruh penambahan ferrite magnet pada fuel hose terhadap performa kendaraan 125 cc. Hal ini dibuktikan dengan rata-rata perubahan torsi sebesar (-0,03 Kgf.m) (pertalite), 1,47 Kgf.m (pertamax), daya sebesar (-0,24 PS) (pertalite), 1,19 PS (pertamax), dan konsumsi bahan bakar sebesar 1,939 L/jam (pertalite), 4,789 L/jam (pertamax). Hasil torsi, daya, dan konsumsi bahan tertinggi yang didapatkan adalah sebesar 0,949 Kgf.m, 7,874 PS, dan 1,636 liter/jam dengan presentase perubahan terbesar yang terjadi pada torsi sebesar 5,41%, daya 4,00%, dan konsumsi bahan bakar sebanyak 11,765%. Sedangkan untuk kadar emisi gas buang tertinggi untuk gas HC adalah 562 ppm vol (ferrite pertalite), kadar emisi gas CO tertinggi adalah 8,53%, kadar emisi gas CO2 adalah 10,80% (ferrite pertamax), dan emisi gas O2 kadar emisinya sebesar 14,91% (ferrite pertalite). Selain itu diketahui presentase perubahan terbesar kadar gas HC sebanyak 102,11%, gas CO sebanyak 38,49%, gas CO2 sebanyak 22,73%, dan untuk gas O2 adalah sebanyak 91,53%.
Kata kunci: magnet, ferrite magnet, performa mesin, four stroke engine
Motorcycle is one of the transportation tools that are often used by the community where the number is increasing every year. With the increase in the number of motorized vehicles, the amount of fuel consumption will also indirectly increase. To overcome these problems, we need another way to save fuel, but with a simple method and inexpensive materials that can be easily found. One way that can be used is to use magnetic ferrite to save vehicle fuel. This study aims to determine the effect of installing magnetic ferrite on fuel hose on the performance of a 125 cc four stroke engine which includes torque, effective power, fuel consumption and exhaust emissions produced by the vehicle.
The method used in this study is based on the SAE standard J1349 (measurement of torque and power), SNI 7554: 2010 standard (measurement of exhaust gas emissions), and SNI standard 19-7118.3-2005 (measurement of fuel consumption) which uses the changing speed testing method with valve (throttle) fully open. The test is carried out on a round of 3000-9000 RPM with a range of 500 RPM for each data collection. The research instruments that will be used in this study are inertia chassis dynamometer, exhaust gas analyzer, oxygen sensor, tachometer, fuel flow meter, 4 in 1 multi-function environment meter, and stopwatch.
From this research, it is known that there is an effect of the addition of magnetic ferrite on the fuel hose to the 125 cc vehicle performance. This is evidenced by the average torque change of (-0.03 Kgf.m) (pertalite), 1.47 Kgf.m (pertamax), power of (-0.24 PS) (pertalite), 1.19 PS (Pertamax), and fuel consumption of 1,939 L / hour (pertalite), 4,789 L / hour (Pertamax). The highest torque, power, and material consumption results are 0.949 Kgf.m, 7.874 PS, and 1.636 liters / hour with the highest percentage changes occurring at 5.41% torque, 4.00% power, and fuel consumption 11.765%. Whereas the highest exhaust gas emission level for HC gas is 562 ppm vol (ferrite pertalite), the highest CO gas emission level is 8.53%, CO2 gas emission level is 10.80% (ferrite Pertamax), and O2 gas emission levels 14.91% (ferrite pertalite). Besides that, it is known that the percentage change in HC gas levels is 102.11%, CO gas is 38.49%, CO2 gas is 22.73%, and for O2 gas is 91.53%.