STUDI EKSPERIMENTAL PENGARUH VARIASI KELENGKUNGAN SUDU BERPENAMPANG LENGKUNG POSISI SEJAJAR TERHADAP DAYA DAN EFISIENSI PADA TURBIN PELTON
EXPERIMENTAL STUDY OF THE EFFECT OF VARIATIONS IN THE CURVATURE OF CURVED BLADES IN PARALLEL POSITIONS ON POWER AND EFFICIENCY IN PELTON TURBINES
Untuk mengurangi ketergantungan pada energi fosil, yaitu dengan memanfaatkan energi terbarukan (EBT). Turbin pelton adalah salah satu jenis turbin dari PLTMH, pemilihan turbin pelton didasarkan pada tingkat efisiensi yang dihasilkan oleh turbin tersebut. Tujuan penelitian ini untuk mengetahui sudut kelengkungan sudu turbin yang memiliki daya dan efisiensi paling optimal.
Penelitian ini menggunakan metode eksperimen dengan memvariasikan sudut kelengkungan sudu sebesar 120°, 150°, dan 180° pada turbin pelton. Jumlah sudu adalah 8 buah yang akan diuji dengan variasi kapasitas aliran air sebesar 0,001854 m3/s, 0,002005 m3/s, 0,002434 m3/s dan 0,003114 m3/s menggunakan nossel berdiameter 25,4 mm dengan jarak semprot 50 mm dan variasi pembebanan pula.
Hasil dari penelitian ini pada variasi kelengkungan sudu 120°, 150°, dan 180° didapatkan daya turbin tertinggi yang dihasilkan sebesar 12,451 watt pada kelengkungan sudu 180° dengan kapasitas aliran air 0,003114 m3/s dipembebanan 30 kg. Sedangkan efisiensi paling optimal yang dihasilkan sebesar 41,03% pada kelengkungan sudu 180° dengan kapasitas aliran air 0,001854 m3/s dipembebanan 7 kg.
Kata Kunci : Turbin, Pelton, Kelengkungan Sudu, Kinerja Turbin Pelton
To reduce dependence on fossil energy, namely by utilizing renewable energy (EBT). Pelton turbine is one type of turbine from PLTMH, the selection of pelton turbine is based on the level of efficiency produced by the turbine. The purpose of this study is to determine the angle of curvature of the turbine blades that have the most optimal power and efficiency.
This study used an experimental method by varying the angle of curvature of the blade by 120°, 150°, and 180° on the Pelton turbine. The number of blades is 8 pieces to be tested with variations in water flow capacity of 0.001854 m3/s, 0.002005 m3/s, 0.002434 m3/s and 0.003114 m3/s using a nozzle with a diameter of 25.4 mm with a spray distance of 50 mm and loading variations as well.
The results of this study on variations in the curvature of the blade of 120°, 150°, and 180° obtained the highest turbine power produced of 12,451 watts at the curvature of the blade 180 ° with a water flow capacity of 0.003114 m3 / s loaded with 30 kg. While the most optimal efficiency produced is 41,03% at a blade curvature of 180 ° with a water flow capacity of 0.001854 m3 / s loaded with 7 kg.
Keywords: Turbine, Pelton, Blade Curvature, Pelton Turbine Performance.