Dalam dunia industri, generator merupakan sumber utama pengadaan energi listrik didalam sistem tenaga listrik untuk menjalankan aktivitas produksi. Pendistribusian energi listrik selalu terdapat gangguan yang menyebabkan penurunan kinerja dan kerusakan. Salah satu gangguan tersebut adalah beban lebih atau overload. Pada penelitian ini bertujuan untuk untuk meminimalisir keadaan beban lebih/over load terhadap generator agar menjaga kualitas kinerja generator tersebut.
Mikrokontroler arduino sebagai pengendali utama berfungsi untuk membaca nilai arus yang akan ditampilkan di LCD (Liquid Crystal Display) dan mengaktifkan relai untuk memutus beban lebih/overload. LCD sebagai indikator apabila pembebanan tersebut dalam kondisi normal atau beban maksimal 70% maka lampu indicator yang menyala berwarna hijau. Jika beban diantara 75%-80% maka indikator lampu berwarna kuning menunjukan bahwa harus waspada dengan adanya beban yang bertambah. Dan pembebanan diantara melebihi 80% maka lampu merah akan menyala menunjukan bahwa generator dalam keadaan kondisi berbeban penuh.
Hasil dari penelitian ini memiliki Akurasi sistem rata-rata kesalahanan hasil pengukuran yang relatif kecil dengan rata-rata error pada arus sebesar 5,14%. Serta memiliki rata-rata waktu delay trip dari terjadinya overload sebesar 2.5 detik.
Kata Kunci: Generator, Sensor Arus, Beban Lebih, Arduino Uno.
In the industrial world, generators are the main source of supplying electric energy in the electric power system to run the production activity. The distribution of electrical energy there is always a disturbance which causes a decrease in performance and damage. One of disturbance is over load. In this research aim to minimize the state over load to the generator in order to maintain the quality of the performance of the generator. The arduino microcontroller as the main controller serves to read the current value will be displayed in the LCD (Liquid Crystal Display), activate the relay to disconnect the overload and LED as the indicator when loading is in normal conditions or maximum load to 70% then the indicator lights are green. If the load is between 75%-80% then the indicator yellow lights to show that should be on the alert with the increased load. And loading between exceeds 80% then the red light will light up showing that the generator in case of fully loaded condition. The results of this study have the accuracy of the system error average measurement results are relatively small with the average error in the current of 5.14%. As well as has the average time delay trip of the occurrence of overload by 2.5 seconds.
Keyword : Generators, Current Sensors, Overload, Arduino Uno