Penggunaan alat – alat listrik adalah hal yang penting dalam pengelolaan energi pada suatu tempat, karena dapat menghemat penggunaan listrik. Untuk mengatasi masalah ini, diperlukan perencanaan yaitu membuat alat mikrokontroler yang dapat menghasilkan sebuah sistem yang sesuai untuk mengendalikan beban listrik secara otomatis yang berbasis IOT (Internet of Things) yang dapat dikontrol dengan aplikasi android telegram.
Untuk Membuat alat ini, dibutuhkan perencanaan agar alat dapat bekerja dengan baik yang dapat terhubung dengan aplikasi android telegram untuk pengoperasiannya. Setelah alat selesai, akan dilakukan pengujian dan analisa terhadap alat tersebut. Dalam alat tersebut menggunakan NodeMCU yang sudah terdapat wifi sebagai mikrokontroler. Lalu untuk sensornya terdiri dari 4 sensor yaitu, sensor PIR digunakan untuk mendeteksi ada atau tidaknya orang, sensor DS18B20 digunakan untuk mendeteksi suhu ruangan, sensor arus ACS712 dan sensor tegangan ZMPT101B.
Pada alat tersebut didapatkan hasil rata – rata delay on sensor PIR 2,1 detik dan off 2,4 detik. Lalu untuk rata –rata delay perintah dari telegram 2,7 detik. Untuk nilai error, sensor suhu memiliki nilai error 2%, sensor tegangan 0,7%, sensor arus 0%, dan nilai error daya 1,9%. Dengan nilai error dan rata – rata delay yang didapat dari pengujian, dapat dikatakan bahwa alat ini dapat bekerja dengan baik.
Kata Kunci : Internet of Things (IOT), Telegram, NodeMCU, DS18B20, PIR
Usage of electronic things is important thing for manage energy on somewhere. Because, it can saving the usage of electricity. To handle this problem, it need a plan that is create a microcontroller device that can make a sistem for handle electric load otomaticaly based by IOT (Internet of Things) that can controling device with android telegram aplication.
To make this device, it need some plan for this device can work well and can connected to android telegram aplication for the control of this device. After this device done be made, it need to do some test and analysis with that device. In that device it used NodeMCU that already has wifi as microcontroller. And for the sensor there is 4 sensor, PIR sensor for detecting there is people or not, DS18B20 sensor for detecting room temperature, current sensor ACS712, and voltage sensor ZMPT101B.
In that device it got the result average of PIR sensor delay on is 2,1 sec, and off 2,4 sec. And average of telegram command is 2,7 sec. For error result, Temperature sensor had error 2%, voltage sensor 0,7%, current sensor 0%, and error power 1,9%. With that value of error and result average that it got from test, it can be tell that this device work well.
Keywords: Internet of Things (IOT), Telegram, NodeMCU, DS18B20, PIR