Pengaruh Perbedaan Sudut Pada Katup Buang Dan Ketinggian Pipa Output Terhadap Kinerja Pompa Hidram
The Effect Of The Difference In Angle On The Exhaust Valve And The Height Of The Output Pipe To The Performance Of The Hydram Pump
Air merupakan salah satu faktor sumber yang sangat penting dan dibutuhkan dalam kehidupan sehari-hari terutama manusia, hewan dan tumbuhan. Untuk memindahkan air dari sumber menuju tempat yang diinginkan dibutuhkan sebuah pompa air. Dalam pengoperasiannya pompa air membutuhkan energi listrik atau bahan bakar minyak. Kebutuhan bahan bakar minyak yang semakin meningkat mengakibatkan bahan bakar minyak semakin langka dan mahal, sehingga diperlukan solusi dari permasalahan ini. Salah solusinya adalah pompa hidram.
Penelitian ini menggunakan metode eksperimen. Teknik analisa data dalam penelitian ini menggunakan analisis data statistika deskriptif kuantitatif yaitu menggambarkan hasil penelitian secara grafis dalam tabel dan grafik. Penelitian ini dilakukan untuk mengetahui pengaruh perbedaan sudut pada katup buang dan ketinggian pipa Output terhadap kinerja pompa hidram. Pompa hidran yang digunakan dalam penelitian ini berdiameter 2 inch, dengan panjang inlet 4 m dan diameter pipa discharge 0,5 inch, menggunakan volume tabung udara 0,0056 m3, variasi sudut katup buang adalah 450, 550, 650, 750.
Hasil penelitian ini diperoleh bahwa pada perancangan pompa hidram didapatkan hasil yang paling optimal adalah pada sudut 450 dengan ketinggian discharge 5 m, volume tabung udara 0,0056 m3. Dengan kapasitas discharge 1,6 x 10-4, efisiensi pompa hidram 22,33% sedangkan efisiensi terendah yaitu pada sudut 750 dengan nilai efisiensi 16,30% dan kapasitas discharge 1,6 x 10-4.
Water is one of the most important resources and needed in our everyday life, especially for humans, animals, and plants. To move water from the source to the desired place, a water pump is needed. In operation, the water pump requires electrical energy or fuel oil. The increasing demand for fuel oil results in increasingly scarce and expensive fuel oil. So, we need a solution to this problem, one of them is the hydram pump.
This research is using experimental method. The method of data analysis in this study uses quantitative descriptive statistics analysis, which describes the results of the study graphically in tables and graphs. The purpose of this study is to determine the effect of angle differences in the exhaust valve and elevations of the output pipe on the performance of the hydram pump. The hydram pump used in this study has a diameter of 2 inches, with an inlet length of 4 m and a discharge pipe diameter of 0.5 inch, using an air tube volume of 0.0056 m3, the angle variation of the exhaust valve is 450, 550, 650, 750.
The results of this study show that in the hydram pump design, the optimal result is obtained at an angle of 450 with a discharge elevation of 5 m, the volume of the air tube is 0.0056 m3. With a discharge capacity of 1.6 x 10-4, the efficiency of the hydram pump is 22.33%, while the lowest efficiency is at an angle of 750 with an efficiency value of 16.30% and a discharge capacity of 1.6 x 10-4.