Bisnis air minum dalam kemasan (AMDK) menarik perhatian para pengusaha kecil yang turut memenuhi permintaan pasar dengan beragam merek dan model. Pengembangan atau perbedaan antara merk satu dengan yang lainnya tidak hanya dalam kualitas air yang dihasilkan tetapi juga dari sistem kerja yang dimiliki atau yang dijalankan. Proses pengisian AMDK pada depot air minum masih menggunakan tenaga manusia, sehingga operator harus memperhatikan volume air pada botol atau galon pada saat pengisian pada botol atau galon yang tersedia.
Penelitian ini bertujuan untuk mengetahui keakurasian pada rancang bangun sistem kontrol pengisian AMDK botol 330 mL dan 600 mL menggunakan arduino uno dengan sensor load cell.
Dari hasil pengujian pada pengisian AMDK botol secara otomatis didapatkan hasil pengujian ketepatan atau keakurasian volume air saat proses pengisian AMDK botol 330 mL dan 600 mL. Nilai akurasi yang di dapatkan pada pengujian pengisian menggunakan botol 330 mL adalah 99.03 % dan nilai akurasi pada pengujian pengisian menggunakan botol 600 mL adalah 99.58 %. Maka keakurasian alat pengisian AMDK ini adalah sebesar 99.3 %. Dari nilai akurasi alat dapat diketahui nilai error pada alat pengisian AMDK sebesar 0.7 %, hal ini dikarenakan debit keluaran air dari pompa elektrik tidak tetap sehingga jumlah air yang dikeluarkan oleh pompa air hasilnya akan berbeda – beda.
Kata Kunci: Arduino Uno, Load Cell, Rangkaian Kontrol
The bottled water business attracts the attention of small entrepreneurs who also meet market demand with a variety of brands and models. Development or difference between one brand and another not only in the quality of water produced but also from the work system that is owned or carried out. The process of filling bottled drinking water in drinking water depots is still using human power, so operators must pay attention to the volume of water in the bottle or gallon when filling in the bottles or gallons available.
This study will be discussed about the accuracy of the design of a control system for bottling bottled water of 330 mL and 600 mL using arduino uno with sensor load cell.
From the results of testing on filling bottled drinking water automatically, the results of testing the accuracy or accuracy of water volume during the filling process of bottled water are bottled 330 mL and 600 mL. The accuracy value obtained in the filling test using a 330 mL bottle is 99.03% and the accuracy value of the bottle filling test 600 mL is 99.58%. So the accuracy of the bottled water filling tool is 99.3%. From the value of the accuracy of the tool, it can be seen that the error value in the bottling device is 0.7%, this is because the output water discharge from the electric pump is not fixed so the amount of water released by the water pump will be different.
Keywords: Arduino Uno, Control Circuit, Load Cell