PENGARUH PENAMBAHAN PET PADA BETON NORMAL DENGAN 30% COPPER SLAG TERHADAP KEMAMPUAN MEKANIS BETON
EFFECT OF PET ADDITION IN NORMAL CONCRETE WITH 30% OF SLAG COPPER ON THE CONCRETE MECHANICAL CAPABILITY
Abstrak
Untuk mengurangi dampak negatif pembuatan beton terhadap lingkungan maka digunakan bahan limbah sebagai bahan campuran dalam pembuatan beton. Pada penelitian ini menggunakan copper slag sebagai subtitusi agregat halus sebesar 30% dengan variasi penambahan serat PET (Polyethylene Terephthalate) sebesar 0,3%, 0,6% dan 0,9% pada beton normal dengan mutu rencana 25 MPa. Hasil penelitian ini menunjukkan penambahan plastik dalam campuran beton menurunkan kuat tekan namun meningkatkan kuat tarik belah dan kuat lentur beton. Nilai kuat tekan mengalami penurunan disetiap variasi campuran dengan persentase penurunan masing-masing sebesar 17,05%, 3,73% dan 18,32% umur 28 hari, sedangkan peningkatan kuat tarik belah dan kuat lentur optimum terjadi pada campuran 30% copper slag dan 0,6% PET dengan persentase peningkatan kuat tarik belah terjadi sebesar 34,92% dan kuat lentur terjadi sebesar 21,91% dari campuran beton normal umur 28 hari.
Kata Kunci: PET, Copper Slag, Kuat Tekan, Kuat Tarik Belah, Kuat Lentur.
Abstract
To reduce the negative impact of making concrete on the environment, waste materials are used as a mixture in making concrete. In this study using copper slag as substitution of 30% fine aggregate with variations in the addition of PET (Polyethylene Terephthalate) fibers of 0.3%, 0.6% and 0.9% in normal concrete with 25 MPa concrete quality plan. The results of this study indicate the addition of plastic in a concrete mixture reduces the compressive strength but increases the tensile strength and flexural strength of concrete. The compressive strength value decreased in each variation of the mixture with a percentage decrease respectively 17.05%, 3.73% and 18.32% at the age of 28 days, while the increase in the tensile strength and flexural strength optimum occurs in a mixture of 30% copper slag and 0.6% PET with a percentage increase in the tensile strength of 34.92% and flexural strength of 21.91% of the normal mixture at 28 days.
Keywords: PET, Copper Slag, Compressive Strength, Split Tensile Strength, Flexural Strength.