Rancang Bangun Sistem Perhitungan Pemakaian Daya Pada Apartemen Secara Real-Time Berbasis Arduino
Design and Build an Arduino-Based Real-Time Power Consumption Calculation System in Apartments
Selama beberapa tahun terakhir apartemen menjadi pilihan beberapa orang untuk dijadikan hunian sementara maupun tetap. Semakin banyak dan tinggi sebuah apartemen maupun gedung bertingkat, instalasi listriknya juga akan semakin komplek dan rumit .Hal ini dapat menimbulkan beberapa permasalahan, beberapa permasalahan yang dapat timbul yaitu perhitungan pemakaian listrik setiap unit hunian setiap bulannya, komplain pemakaian listrik dari penghuni yang tidak puas dengan perhitungan pembayaran listrik yang dipakai. Oleh karena itu, telah dikembangkan alat yang dapat menghitung konsumsi daya listrik yang hasilnya akan disimpan kedalam database dan dapat dilihat pada web. Tujuan penelitian pada artikel ini yaitu membuat suatu metode baru yang diharapkan menjadi salah satu solusi mengatasi permasalahan dalam menghitung pemakaian listrik unit hunian pada apartemen. Dengan menggunakan metode kuantitatif dalam pengumpulan data. Dengan mengumpulkan beberapa komponen yang diperlukan untuk penelitian ini yaitu, modul pzem-004T, Wemos D1 mini, dan Arduino Uno. Hasilnya, nilai error sensor tegangan sebesar 0,17%, dan nilai error sensor arus sebesar 5,54% dan daya sebesar 6,92%. Kita dapat menyimpulkan bahwa alat rancangan ini sudah bekerja cukup baik dalam menghitung konsumsi daya pada unit apartemen.
Over the last few years, apartments have become the choice of several people to be made temporarily or permanently. The more and taller an apartment or multi-storey building is, the electrical installation will also be more complex and complicated. This can cause several problems, several problems that can arise, namely the use of electricity for each residential unit every month, complaints about electricity consumption from residents who are not satisfied with the calculation. payment for electricity used. Therefore, a tool has been developed that can calculate electrical power, the results are stored in the database and can be viewed on the internet.. The purpose of the research in this article is to create a new method that is expected to be a solution to the problem of activating the electricity consumption of residential units in apartments. By using quantitative methods in data collection. By collecting several components needed for this research, namely, the pzem-004T module, Wemos D1 mini, and Arduino Uno. As a result, the voltage sensor error value is 0.17%, and the current sensor error value is 5.54% and the power is 6.92%. We can conclude that this design tool has worked well in calculating the power in the apartment unit.