Seiring berkembangnya teknologi pada masa sekarang ini, juga mempengaruhi jumlah permintaan logam. Karena sifat logam yang kuat, keras, dan dapat dibentuk menjadi bahan utama berbagai kebutuhan. Baja ST41 adalah salah satu baja karbon rendah yang sering digunakan dalam komponen mesin-mesin industri. Namun pada logam rentan terkena korosi yang dapat menyebabkan kegagalan atau kerusakan. Blackening merupakan sebuah proses penghitaman atau pemberian warna hitam pada sebuah permukaan besi, stainless steel dan lainnya yang bertujuan untuk meningkatkan ketahanan terhadap korosi. Dalam mengukur atau menghitung laju korosi peneliti menggunakan metode kehilangan berat.
Dalam penelitian ini dimaksudkan untuk memahami fenomena laju korosi secara teoritis dalam proses blackening material baja karbon rendah (ST41) akibat variasi lama pencelupan. Dengan proses blackening variasi suhu 150 ◦C dan 200 ◦C dan pencelupan dengan menggunakan air hujan di Sidoarjo dan Gresik selama 1 minggu, 3 minggu dan 5 minggu. Salinitas, pH, dan TDS diuji sebelum proses perendaman. Dengan menggunakan metode kehilangan berat akan didapatkan berapa besar laju korosinya. Dan Analisa Microscope perbesaran 1000x dimaksudkan untuk mengamati perubahan strukur kimia spesimen uji setelah terjadi korosi erosi pada proses pengujian.
Hasil dari penelitian didapatkan bahwa variasi waktu dan media perendaman mempengaruhi terhadap proses laju korosi, laju korosi terbesar adalah pada waktu perendaman 1 minggu dengan temperatur 200◦C yaitu sebesar 6,309 mpy, sedangkan dengan waktu perendaman selama 3 minggu laju korosi yang terjadi sebesar 4,006 mpy. semakin lama proses pencelupan makan semakin cepat laju korosinya. Salinitas, pH, dan TDS juga berpengaruh terhadap laju korosi Baja ST41. Dan dapat disimpulkan semakin besar TDS dan pH semakin basa maka semakin cepat laju korosi yang terjadi.
Kata kunci : laju korosi, proses blackening, analisa Microscope
As technology develops in the present, it also affects the amount of metal demand. Because of the strong, hard and can be formed metal properties into the main ingredients of various needs. ST41 steel is one of the low carbon steels which is often used in industrial machinery components. However, in metals susceptible to corrosion that can cause failure or damage. Blackening is a process on an iron, stainless steel and other surface that aims to increase corrosion resistance. In measuring or calculating the corrosion rate, researchers used the method of weight loss.
In this study it was intended to understand the phenomenon of corrosion rate theoretically in the blackening process of low carbon steel material (ST41) due to variations in the length of immersion. With the blackening process temperature variations of 150 ◦C and 200 ◦C and dyeing using rainwater in Sidoarjo and Gresik for 1 week, 3 weeks and 5 weeks. Salinity, pH and TDS were tested before the immersion process. Using the method of losing weight will be obtained how much the corrosion rate is. And a 1000x magnification microscope analysis is intended to observe changes in the chemical structure of the test specimen after erosion corrosion in the testing process.
The results of the study showed that time variation and immersion media influenced the corrosion rate process, the biggest corrosion rate was at 1 week immersion with a temperature of 200◦C which was 6.309 mpy, while the immersion time was 3 weeks the corrosion rate was 4.006 mpy. the longer the feeding process the faster the corrosion rate. Salinity, pH, and TDS also influence the corrosion rate of ST41 Steel. And it can be concluded that the greater the TDS and pH the more alkaline, the faster the corrosion rate will occur
Keywords: corrosion rate, blackening process, Microscope analysis