UJI KARAKTERISTIK NYALA API DIFUSI CAMPURAN BIOETANOL DARI LIMBAH BREM DENGAN PERTALITE
FIRE CHARACTERISTICS TEST OF BIOETHANOL MIXTURE DIFFERENCE FROM BREM WASTE WITH PERTALITE
Abstrak
Di Indonesia pemakaian sumber energi minyak bumi masih sangat tinggi, bahkan semakin meningkat pesat. Pemakaian BBM sebagai bahan bakar kini mulai dapat digantikan dengan listrik dengan harga yang sangat mahal. Untuk mengatasi keterbatasan bahan bakar minyak, pemerintah telah bersiap untuk mengembangkan sumber energi alternatif. Tujuan penelitian ini untuk mengetahui karakteristik nyala api (temperatur, tinggi nyala api, lama pembakaran) dari campuran bioetanol limbah brem dan pertalite. Penelitian ini menggunakan metode eksperimen. Bahan bakar yang digunakan adalah pertalite dan bioetanol dengan variasi campuran (E0, E10, E20, E30, E40, dan E50). Pengujian karakteristik campuran bioetanol dari limbah brem dengan pertalite mengacu standar ASTM (nilai kalor ASTM D240, viskositas ASTM D445, Densitas ASTM D1298, Octan Number ASTM D2699). Alat yang digunakan untuk penelitian adalah lampu sumbu sedangkan instrumen yang digunakan untuk penelitian ini adalah thermocoupel, data logger, high speed camera, dan milimeter block. Data hasil penelitian di analisis mengunakan metode deskriptif. Hasil penelitian ini menunjukkan bahwa sifat karakteristik fisika untuk densitas terbaik yaitu E0 0,73 gr/cm3, viskositas terbaik yaitu E0 1,88 cSt, nilai kalor terbaik yaitu E0 10385,60 kkal/kg, dan octan number terbaik yaitu E50 93,60. Dan hasil temperatur rata-rata tertinggi nyala api yaitu E0 406,66°C. Tinggi nyala api tertinggi yaitu E0 6,55 cm. Lama pembakaran api tercepat per 100 ml yang dicapai yaitu E0 2,70 jam. Warna nyala api terbaik yang dihasilkan pada pembakaran difusi yaitu E10 kuning biru. Hasil terbaik keseluruhan diperoleh pada campuran E0.
Kata kunci: bioetanol, pertalite, karakteristik nyala api.
Abstract
In Indonesia, the use of petroleum energy sources is still very high, even increasing rapidly The use of fuel as a fuel can now be replaced with electricity at a very expensive price. To overcome the limitations of fuel oil, the government has prepared to develop alternative energy sources. The purpose of this study was to determine the characteristics of the flame (temperature, flame height, burning time) of a mixture of bioethanol waste of Brem and Pertalite. This research is using experimental method. The fuel used is pertalite and bioethanol with various mixtures (E0, E10, E20, E30, E40, and E50). Testing the characteristics of the bioethanol mixture from Brem waste with pertalite refers to ASTM standards (calorific value ASTM D240, viscosity ASTM D445, Density ASTM D1298, Octan Number ASTM D2699). The instrument used for this research is the axis lamp while the instruments used for this research are thermocouple, data logger, high speed camera, and millimeter block. The research data were analyzed using descriptive methods. The results of this study indicate that the physical characteristics for the best density are E0 0.73 gr/cm3, the best viscosity is E0 1.88 cSt, the best heating value is E0 10385.60 kcal/kg, and the best octane number is E50 93.60. . And the result of the highest average temperature of the flame from a mixture of bioethanol waste of Brem and Pertalite is E0 406.66°C. The highest flame height is E0 6.55 cm. The fastest burning time per 100 ml achieved is E0 2.70 hours. The best flame color produced in diffusion combustion is blue yellow E10. The best overall results were obtained in the E0 mixture.
Key words: bioethanol, pertalite, flame characteristics.