Abstrak Padapenelitian ini, penggerak hammer pada plat collecting elektrode menggunakan mikrocontroller ardiuino uno sebagai penggerak motor DC. Tujuan dari penelitian ini adalah untuk menghasilkan pengendalian motor DC menggunakan Arduino uno pada rancang bangun electrostatic precipitator untuk pengendapan debu limbah industri. Prinsip kerja dari alat ini ketika saklar rangkaian control di on kan EC Centrifugal Fan akan bekerja selama 40 detik, kecepatan EC Centrifugal Fan dapat diatur dengan cara memutar potensio meter yang ada pada ruang controller. setelah 40 detik EC Centrifugal Fan akan mati dan motor hammer akan bekerja selama 20 detik untuk merontokan debuh yang menempel pada plat CE.
Kata kunci; Ardiuno uno, Electrostatic Precipitator
Abstract In this research, The hammer drive preceptor on the collecting electrode plate was used an ardiuinouno
microcontroller as a DC motor drive. The purpose of this study is to produce a DC motor control using Arduino uno
on the design of electrostatic precipitators for the deposition of industrial waste dust. the working principle of this
tool when the control circuit switch is on the EC Centrifugal Fan will working for 40 seconds, the EC Centrifugal
Fan speed can be adjusted by rotating the potentiometer in the controller room. after 40 seconds, the EC Centrifugal
Fan will turning off and the hammer motor will work for 20 seconds to knock down the stick on the CE plate.
Keywords; Ardiunouno, Electrostatic Precipitator