Redesign of Components and Function Tests on a Mini Drill Lathe Type HQ 400 as a Practicum Tool in the Applied Bachelor of Mechanical Engineering Study Program, Surabaya State University
Mesin perkakas memiliki peran yang sangat penting dalam bidang industri, terutama industri manufaktur. Macam macam jenis mesin perkakas yang sering biasanya digunakan, salah satunya mesin bubut. Kerusakan yang sering terjadi adalah 3 pada komponen penggerak mesin, yaitu chuck, pulley, dan dinamo. Tujuan pada penelitian ini adalah mengetahui proses redesain, perakitan dan uji fungsi chuck, pulley dan dinamo.
Metode penelitian yang digunakan pada penelitian ini merupakan jenis penelitian kuantitatif karena bertujuan untuk mendeskripsikan fungsi dari suatu mesin setelah dilakukan redesain dan proses pergantian part/komponen penggerak.
Berdasarkan hasil dari redesain dan proses perakitan pada mesin bubut bor mini HQ 400 terdapat 3 komponen yang di redesain yaitu chuck, pulley, dinamo. Spesifikasi pada mesin bubut bor mini hq 400 yaitu berdimensi 970 x 580 x 965 mm, dinamo berkecepatan 1500 RPM dengan menggunakan mata bubut/pahat yang digunakan berdiameter 6 mm pada uji fungsi bubut, sedangkan pada uji fungsi bor, mata bor yang digunakan berdiameter 4 mm dengan semua kecepatan yang diujikan pada material baja berjenis baja st 40 dengan panjang 10 cm dinyatakan dapat berfungsi.
Machine tools have a very important role in the industrial sector, especially the manufacturing industry. Various types of machine tools that are often used, one of which is a lathe. The damage that often occurs is the 3 components driving the machine, namely the chuck, pulley, and dynamo. The purpose of this research is to know the process of redesigning, assembling and testing the function of the chuck, pulley and dynamo.
The research method used in this study is a type of quantitative research because it aims to describe the function of a machine after redesigning and replacing the driving components.
Based on the results of the redesign and assembly process on the HQ 400 mini drill lathe, there are 3 redesigned components, namely chuck, pulley, dynamo. The specifications for the hq 400 mini drill lathe have dimensions of 970 x 580 x 965 mm, dynamo speed of 1500 RPM using a lathe/chisel bit that is used with a diameter of 6 mm in the lathe function test, while in the drill function test, the drill bit used is 4 mm in diameter with all the speeds tested on st 40 steel type steel material with a length of 10 cm it is stated that it can function.
.