Design and Construction of a Screw Extruder Machine for Charcoal Briquettes Made from Semi-Automatic Coconut Shell Raw Material
Alat pencetak briket masih relatif mahal bagi pengusaha berskala home industry sehingga masih membuat briket dengan cara manual. Dengan cara manual membutuhkan waktu dan tenaga yang lebih, sehingga tidak effisien. Maka dari itu, pada penelitian ini memliki tujuan membuat mesin pencetak briket dengan menggunakan screw extruder. Metode penelitian yang digunakan adalah Research and Development (R&D) dengan tahapan mendesain mesin sesuai dengan komponen yang diperlukan yang meliputi proses perakitan pengelasan, pemotongan plat, pengeboran, dan pembubutan dan yang terakhir adalah uji fungsi alat. Hasil yang didapatkan dari perancangan mesin ini adalah mesin screw extruder arang briket berbahan baku batok kelapa semi otomatis yang berkapasitas 2kg/10 menit. Briket terbaik didapatkan pada perbandingan arang dan perekat 4:1 dan takaran air 250ml.
Briquette printing equipment is still relatively expensive for home industry-scale entrepreneurs so they still make briquettes manually. Manually requires more time and energy, so it is not efficient. Therefore, this research has the aim of making a briquette printing machine using a screw extruder. The research method used is Research and Development (R&D) with the stages of designing the machine according to the required components which include the assembly process of welding, cutting plates, drilling, and turning and the last is the tool function test. The results obtained from the design of this machine are semi-automatic screw extruder charcoal briquettes made from coconut shells with a capacity of 2kg / 10 minutes. The best briquettes are obtained in the ratio of charcoal and adhesive 4: 1 and 250ml water dose.