PERENCANAAN PERAWATAN MESIN PRODUKSI ROLLER MILL UNIT 1 TUBAN DENGAN
METODE RELIABILITY CENTERED MAINTENANCE (RCM) DI PT SEMEN INDONESIA
(PERSERO) TBK
MAINTENANCE PLANNING OF UNIT 1 TUBAN ROLLER MILL PRODUCTION MACHINE WITH
RELIABILITY CENTERED MAINTENANCE (RCM) METHOD AT PT SEMEN INDONESIA
Suatu proses produksi perusahaan adalah unsur penting yang harus beroperasi secara stabil dan untuk
dapat memproduksi produk hasil yang optimal. Dari suatu proses produksi terdapat mesin produksi yang
membantu hasil produksi, tetapi terdapat kendala dalam produksi yang sering terjadi di dalam mesin.
Maka dari itu, penelitian diperlukan untuk menganalisis suatu keandalan mesin, meminimasi breakdown
time, dan membuat jadwal perawatan mesin dengan menggunakan metode RCM. Penelitian ini berupa
menggunakan metode Reliability Centered Maintenance (RCM) ini dibuat dengan menghitung jumlah
kegagalan dengan failure mode effect analysis (FMEA) mendapatkan hasil RPN dibawah 300 (<300). Dan
menghitung hasil availability mendapat sebesar 80%, serta MTTR mendapat data hasil 3,9 jam dan MTBF
sebesar 58,7 jam. Hasil penelitian membuktikan bahwa menggunakan metode RCM dapat meminimasi
breakdown time sebesar 80% dan mendapat hasil MTTR selama 3,9 jam.
A company's production process is an important element that must operate stably and to be able to
produce optimal product results. From a production process there is a production machine that helps
production results, but there are obstacles in production that often occur in the machine. Therefore,
research is needed to analyze a machine's reliability, minimize breakdown time, and make a machine
maintenance schedule using the RCM method. This research is in the form of using the Reliability
Centered Maintenance (RCM) method. This research is made by calculating the number of failures with
failure mode effect analysis (FMEA) to get RPN results below 300 (<300). And calculating the availability
results got 80%, and MTTR got 3.9 hours of data and MTBF of 58.7 hours. The results of the study prove
that using the RCM method can minimize breakdown time by 80% and get an MTTR result of 3.9 hours.