Salah satu hal yang perlu dipertimbangkan dalam merencanakan sebuah bendungan, yaitu stabilitas bendungan terhadap rembesan air yang mengalir melalui tubuh bendungan. Penelitian ini bertujuan untuk mengamati pola aliran rembesan air yang terjadi pada tubuh bendungan dan menghitung debit rembesan yang terjadi. Penelitian ini menggunakan pemodelan bendungan tipe urugan homogen. Material diambil dari lokasi konstruksi bendungan Tugu, Trenggalek, Jawa Timur. Model ini berbentuk trapesium dengan panjang model adalah 80 cm (3200 cm), tinggi model adalah 22 cm (880 cm) dan lebar bawah tubuh bendungan adalah 44 cm (1760 cm), sedangkan lebar bagian atas lereng/ mercu bendungan bergantung pada sudut kemiringan lerengnya. Variasi kemiringan lereng 30°, 50°, dan 70° serta dengan tingkat kepadatan tubuh bendungan sebesar ± 90%. Bagian hilir pada model ini dipasang drainase sepanjang 30 cm dan tebal 2 cm.
Ada dua kesimpulan yang didapatkan dari kedua metode, yaitu: uji model fisik (empiris) dan metode casagrande (teoritis). Pertama, semakin besar sudut lereng maka ketinggian tekanan air rata-rata atau pola aliran rembesan akan mengalami penurunan dan bentuk pola aliran rembesan semakin landai. Kedua, semakin besar sudut lereng maka debit rembesan yang dihasilkan akan semakin mengecil dan begitu juga sebaliknya.
Kata Kunci: Rembesan, Sudut lereng, Bendungan Urugan Homogen, Uji model fisik, Casagrande
One of the things that need to be considered in planning a dam, is the stability of the dam against the water seepage flowing through the dam body. This research aims to observe the flow pattern of water seepage that occurs in the dam body and calculate the discharge of the seepage occurring. The research uses the homogeneous fill dam modeling. The material taken from construction site of Tugu Dam Project, Trenggalek, East Java. This model is trapezoidal with the length of the model is 80 cm (3200 cm), the model height is 22 cm (880 cm) and the bottom width of the dam body is 44 cm (1760 cm), while the upper width of the slope/top point depends on the angle of the slope. The variation of slope is 30°, 50°, and 70° and with a dam body density of ± 90%. The downstream in this model is fitted 30 cm long drainage and 2 cm high.
There are two conclusions gained in this study from both methods are Physical model test (empirical) and Casagrande (theoretical) method. First, the larger the angle of slope then the average height of water pressure or seepage flow pattern will decrease and the shape of the flow pattern seepage is more sloping. Second, the larger the angle of slope, then the resulting discharge of the seepage will be increased and vice versa.
Keywords: Seepage, The Angle Of Slope, Homogeneous Fill Dam, Physical Model Test, Casagrande