Separator merupakan membran berpori yang ditempatkan diantara elektroda positif dan elektroda negatif, permeabel terhadap aliran ion tetapi dapat mencegah terjadinya kontak antara kedua elektroda. Peran separator sangat penting yaitu mencegah terjadinya sirkuit pendek pada baterai. Pada penelitian ini bertujuan untuk mengetahui pengaruh penambahan massa Al(OH)3 terhadap karakteristik separator PVDF-CA/Al(OH)3, massa yang digunakan sebesar 0,175 gram dan 0,262 gram. Komposit PVDF-CA/Al(OH)3 didapatkan melalui metode NIPS yang kemudian dicetak pada kaca substrat dengan menggunakan spin coating dan dilakukan karakterisasi menggunakan BET dan CV. Hasilnya luas permukaan separator PVDF-CA/Al(OH)3 (0,175 gram Al(OH)3) sebesar 25,514 m2/g dan rentang diameter 3,6 nm - 3,9 nm, sedangkan luas permukaan pada separator PVDF-CA/Al(OH)3 (0,262 gram Al(OH)3) sebesar 49,371 m2/g dan rentang diameter pori 3,6 nm - 4,5 nm sehingga dapat dikategorikan sebagai mesopori. Kurva histerisis reversibilitas memiliki jarak loop yang besar, yang menunjukkan reaksi oksidasi-reduksi berjalan dengan tidak baik.
Separator is a porous membrane placed between positive electrodes and negative electrodes, permeable to ion flow but can prevent contact between the two electrodes. The role of the separator is very important, namely preventing the occurrence of short circuits on the battery. In this study aims to determine the effect of adding mass of Al (OH) 3 to the characteristics of PVDF-CA / Al (OH) 3 separator, the mass used is 0.175 grams and 0.262 grams. PVDF-CA / Al (OH) 3 composites were obtained through the NIPS method which was then printed on the glass substrate using spin coating and characterization using BET and CV. The result is the surface area of PVDF-CA / Al (OH) 3 separator (0.175 grams of Al (OH) 3) of 25.514 m2 / g and a diameter range of 3.6 nm - 3.9 nm, while the surface area of the PVDF-CA / Al separator (OH) 3 (0,262 gram Al (OH) 3) of 49,371 m2 / g and the pore diameter range is 3,6 nm - 4,5 nm so that it can be categorized as mesopore. The reversibility hysteresis curve has a large loop distance, which indicates the oxidation-reduction reaction is not working well.