Hot turning adalah metode pemesinan yang dilakukan pada peralatan mesin konvensional di mana benda kerja dipanaskan sebelum operasi pemotongan dilakukan dan dengan demikian mengurangi kekuatan gesernya. Pelunakan benda kerja adalah metode yang lebih efektif daripada memperkuat alat pemotong dalam mesin konvensional. Dampak dari proses penambahan temperatur juga akan mempengaruhi sifat material, bahwa fase atau struktur dari logam berubah dengan kenaikan temperatur yang dengan sendirinya mempunyai konsekuensi terhadap sifat-sifat mekanisnya seperti : tarik, tekan, geser, puntir, lengkung dan tekuk, termasuk juga kekerasan pada meterial.
Penelitian ini dilakukan dengan memvariasikan temperatur 100-120°C, 200-220°C, 300-320°C, 400-420°C, dan 500-520°C. Benda kerja yang digunakan pada proses hot turning adalah AISI 4140 dengan kekerasan 44 HRC.
Hasil pengujian kekasaran permukaan menunjukkan bahwa semakin tinggi temperatur pada proses hot turning maka hasil tingkat kekasaran rendah. Penurunan tingkat kekasaran diiringi juga dengan penurunan harga kekerasan. Terlihat bahwa pada temperatur 100-120°C hasil tingkat kekasaran yaitu 3,817 µm, harga kekerasan yaitu 43,8 HRC. sedangkan ditemperatur 500-520°C hasil tingkat kekasaran menurun menjadi 3,149 µm, harga kekerasan menjadi 41,9 HRC.
Hot turning is a machining method carried out on conventional machine tools where the workpiece is heated before the cutting operation is carried out and thus reduces its shear strength. Softening workpieces is a more effective method than strengthening cutting tools in conventional machines. The impact of the process of adding temperature will also affect the material properties, that the phase or structure of the metal changes with increasing temperature which in itself has consequences for mechanical properties such as: tensile, pressing, shearing, twisting, bending and bending, including hardness at the meterial.
This research was carried out by varying the temperatures from 100-120 ° C, 200-220 ° C, 300-320 ° C, 400-420 ° C, and 500-520 ° C. The workpiece used in the hot turning process is AISI 4140 with a hardness of 44 HRC.
The surface roughness test results show that the higher the temperature in the hot turning process the lower the roughness results. A decrease in the level of roughness was accompanied by a decrease in the price of violence. It can be seen that at temperatures of 100-120 ° C the roughness level was 3.817 µm, the price of hardness was 43.8 HRC. while the temperature of 500-520 ° C results in a roughness level of 3.149 µm, the price of hardness being 41.9 HRC.