Penelitian ini dilakukan dengan memanfaatkan limbah karbit sebagai material pengganti semen dalam pembuatan beton mutu normal. Tujuan penelitian ini adalah untuk mengetahui jumlah persentase pemakaian limbah karbit dan pengaruhnya dalam pembuatan beton normal.
Penelitian ini dilakukan dengan menggantikan prosentase tertentu dari berat semen dengan limbah karbit. Beton dicetak munggunakan cetakan silinder berukuran tinggi 20 cm dengan diameter 10 cm. Pengujian dilakukakan ketika beton mencapai umur 7, 14, 21, dan 28 hari.
Uji yang dilakukan adalah uji kuat tekan menggunakan Compression Testing Machine laboratorium Teknik Sipil UNESA. Hasil dari penelitian ini didapat nilai kuat tekan maksimal limbah karbit berada pada titik 10%. Melebihi itu kuat tekan beton akan mengalami penurunan.
Kata kunci : Limbah Karbit, Kuat Tekan, Beton Normal
This research was conducted by utilizing carbide waste as a cement replacement material in the manufacture of normal quality concrete. The purpose of this study was to determine the number of percentages of carbide waste usage and its effect in making normal concrete.
This research was conducted by replacing a certain percentage of the weight of cement with carbide waste. Printed concrete uses cylindrical molds measuring 20 cm high with a diameter of 10 cm. The test was carried out when the concrete reached the ages of 7, 14, 21 and 28 days.
The test is a compressive strength test using Compression Testing Machine UNESA civil engineering laboratory. The results of this study obtained the maximum compressive strength of carbide waste at the point of 10%. Moreover, the compressive strength of the concrete will decrease.
Keywords: Carbide Waste, Compressive Strength, Normal Concrete