ANALISA PERBANDINGAN SISTEM KONTROL BERBASIS ARDUINO DAN PLC PADA PENGENDALIAN SUHU
Suhu merupakan faktor alam yang sangat penting dalam kehidupan. Sistem kontrol juga menjadi bagian yang penting dan terpadu dari proses-proses dalam pabrik dan industri modern. Beberapa faktor yang mempengaruhi perubahan siklus persentasi tingkat akuratan dalam sistem kontrol salah satunya pengendalian suhu yang tepat. Penggunaan sensor suhu RTD PT 100 merupakan sensor untuk memonitor suhu suatu kondisi mesin atau peralatan yang suhunya dapat berubah-ubah. Pembacaan suhu oleh sensor RTD PT 100 langsung dianalisis untuk keperluan tertentu. Desain dan implementasi sistem monitoring suhu kondisi mesin menggunakan sensor suhu RTD PT 100 yang terdiri dari sensor RTD PT 100, monitoring temperatur relay dan komponen pendukung lainnya, dimana perangkat ini terdapat bagian pembacaan suhu dan menampilkan hasil pembacaan suhu. Di bagian pembacaan suhu terdapat sensor suhu RTD PT 100 itu sendiri kemudian hasil pembacaannya dikirim melalui kabel komunikasi. Di bagian penerima akan diterima oleh monitoring sistem kontrol untuk menampilkan suhu dari mesin atau peralatan tersebut. Analisa pada penelitian ini dilakukan dengan membandingkan sistem kontrol arduino dan PLC pada pengendalian suhu dengan menggunakan sensor RTD PT 100. Hasil penelitian ini didapatkan bahwa sensor RTD PT 100 menggunakan arduino mempunyai akurasi yang cukup baik rata-rata sebesar 95,91%. Sedangkan sensor RTD PT 100 dengan menggunakan PLC memiliki tingkat akurasi yang sangat baik rata-rata sebesar 99,35%. Dengan ini dapat disimpulkan bahwa sensor RTD PT 100 pada PLC tingkat keakurasian lebih tinggi, sehingga sensor tersebut layak digunakan dalam sistem pengendalian suhu.
Temperature is a very important natural factor in life. Control systems have also become an important and integrated part of processes in modern factories and industries. Several factors that affect the change in the percentage level of accuracy in the control system, one of which is proper temperature control. The use of the RTD PT 100 temperature sensor is a sensor to monitor the temperature of a machine or equipment condition whose temperature can vary. Temperature readings by the RTD PT 100 sensor are directly analyzed for specific purposes. Design and implementation of the engine condition temperature monitoring system using the RTD PT 100 temperature sensor which consists of the RTD PT 100 sensor, temperature monitoring relay and other supporting components, where this device contains a temperature reading section and displays the temperature reading results. In the temperature reading section there is the RTD PT 100 temperature sensor itself then the reading results are sent via a communication cable. At the receiver will be received by the monitoring control system to display the temperature of the machine or equipment. The analysis in this study was carried out by comparing the Arduino and PLC control systems for temperature control using the PT 100 RTD sensor. The results of this study found that the PT 100 RTD sensor using Arduino had a fairly good accuracy of 95.91% on average. While the PT 100 RTD sensor using PLC has a very good accuracy rate of 99.35% on average. With this it can be concluded that the PT 100 RTD sensor with PLC has a higher level of accuracy, so it is suitable to be used as a temperature sensor in a temperature control system.