Hasil observasi di Laboratorium Pelapisan Jurusan Teknik Mesin Universitas Negeri Surabaya (UNESA) ialah di lab ini mahasiswa sering melakukan praktik pelapisan logam dengan cara elektroplating secara manual, sehingga rentan terdapat hasil pelapisan yang kurang sesuai, ketepatan waktu yang kurang efektif, cairan kimia berbahaya yang dapat terkena kulit tangan, serta belum adanya trainer pelapisan logam dengan Sistem Kontrol. Sebagai upaya penunjang pembelajaran agar lebih efektif dan aman maka tujuan dari penelitian ini yaitu terciptanya sistem kontrol trainer pelapisan logam berbasis mikrokontroler arduino nano 328P. Dimana trainer ini akan bermanfaat sekali untuk praktikum pelapisan yang sering kali dilakukan oleh para mahasiswa di lab pelapisan.
Dalam perancangan ini menggunakan jenis penelitian (R&D) Research and Development atau penelitian pengembangan berbasis eksperimen. Dengan tujuan untuk dapat menentukan spesifikasi komponen penggerak utama yang akan digunakan pada trainer pelapisan logam berbasis mikrokontroler Arduino Nano 328P.
Hasil dari perancangan sistem kontrol trainer pelapisan logam berbasis mikrokontroler arduino nano 328P ini didapatkan mekanime kerja alat sesuai dengan yang dirancang dan hasil uji performa trainer bekerja dengan baik berdasarkan pengujian pelapisan sebanyak 18 kali dan hasil ketebalan yang dihasilkan rata-rata sesuai berdasarkan rectifier yang digunakan yaitu 6A dan 10A. sistem kontrol ini berfungsi dengan baik sesuai perintah inputan.
Kata Kunci: Trainer Pelapisan, Sistem Kontrol, Mikrokontroler Arduino Nano, Trainer Pelapisan Logam
The results of observations at the coating laboratory of the Mechanical Engineering Department State University Of Surabaya (UNESA) are that in this lab students often practice metal coating by electroplating manually, so that there are less suitable coating results, timeliness that is less effective, dangerous chemical liquids that can exposed to the skin of the hands, as well as the absence of metal coating trainers with the Control System. As an effort to support learing to be more effective and safe, the purpose of this study is to create a metal coating trainer control system based on the Arduino Nano 328P microcontroller. Where this trainer will be very useful for coating practice which is often done by students in the coating lab.
In this design using a type of research (R & D) Research and Development or experimental-based development research. With the aim of being able to determine the specifications of the main drive components that will be used in the metal coating trainer based on the Arduino Nano 328P microcontroller.
The results of the design of the metal coating trainer control system based on the Arduino Nano 328P microcontroller obtained the working mechanism of the tool in accordance with the designed and the performance test results of the trainer worked well based on coating testing 18 times on the thickness results produced according to the rectifier used were 6A and 10A. This control system properly according to the input command.
Keyword : Coating Trainer, Control System, Arduino Nano
Microcontroller, Metal Coating Trainer