Plastik saat ini merupakan bagian kehidupan sehari-hari manusia. Dalam dua dasarwarsa terakhir, kemasan plastik telah merebut pasar kemasan dunia, menggantikan kemasan kaleng dan gelas. Kemasan plastik sudah mendominasi industry makanan di Indonesia dan kemasan luwes (fleksibel) menempatiporsi 80%. Jumlah plastik yang digunakan untuk mengemas, menyimpan dan membungkus makanan mencapai 53%. Penelitian dengan menggunakan limbah plastik sebagai bahan pembuatan beton telah dilakukan dengan tujuan untuk memanfaatkan limbah plastik yang sulit terurai, dan berbahaya bagi lingkungan jika jumlahnya terus bertambah.
Tujuan dari penelitian ini adalah pemanfaatan limbah botol plastik dan juga mengetahui sifat mekanis dari beton ringan seluler setelah penambahan serat botol plastik. Pengaruh terhadap sifat mekaniknya berupa kuat tekan yang lebih besar untuk penambahan 0.3% serat botol plastik dibandingkan dengan tanpa serat berikut ini nilai untuk penambahan 0.3% serat didapat 5.31 MPa dan tanpa serat atau 0.0% didapat 4.24 MPa pada umur 28 hari.
Kuat lentur balok dan kuat lentur panel pada penambahan 0.5% serat botol plastik terjadi kuat lentur optimal yaitu 2.89 MPa pada balok dan 0.492 MPa pada panel umur 28 hari dan tanpa serat 1.59 MPa lentur balok dan 0.228 MPa lentur panel pada umur 28 hari. Kuat lentur meningkat seiring dengan penambahan optimal 0.5% serat botol plastik, tetapi jika lebih dari 0.5% serat terjadi penurunan kuat lentur beton ringan khususnyanya pada 0.7% serat.
Nowaday, plastic is a part in everyday human activities. In the past two decades, plastic packaging has captured the global packaging market, replacing cans and glass packaging. Plastic packaging has dominated the food industry in Indonesia and flexible (flexible) packaging accounts for 80%. The amount of plastic used to package, store and wrap food reaches 53%. Research using plastic waste as a material for making concrete has been carried out with the aim to utilize plastic waste that is difficult to decompose, and is harmful to the environment if the numbers continue to grow.
The purpose of this study is the utilization of plastic bottle waste and also knowing the mechanical properties of cellular lightweight concrete after the addition of plastic bottle fibers. Influence on mechanical properties in the form of a greater compressive strength for the addition of 0.3% plastic bottle fiber compared to without the following fiber values for the addition of 0.3% fiber obtained 5.31 MPa and without fiber or 0.0% obtained 4.24 MPa at 28 days.
Beam flexural strength and panel flexural strength at the addition of 0.5% plastic bottle fibers occur optimal flexural strength of 2.89 MPa on the beam and 0.492 MPa on the panel age 28 days and without fiber 1.59 MPa beam flexure and 0.228 MPa panel flexion at 28 days. Flexural strength increases with the optimal addition of 0.5% plastic bottle fiber, but if more than 0.5% fiber there is a decrease in the flexural strength of lightweight concrete specifically at 0.7% fiber.