GAMBAR PENGEMBANGAN RENCANA PEMBANGUNAN GEDUNG HANGGAR PEMADAM KEBAKARAN TAHAP 2 DINAS PEMADAM KEBAKARAN KOTA BATU

DEVELOPMENT PLAN DRAWINGS FOR CONSTRUCTION OF THE 2ND PHASE FIRE HANGAR BUILDING OF BATU CITY FIRE DEPARTMENT

Berdasarkan Kerangka Acuan Kerja (KAK) pembangunan gedung hanggar tahap 1, Pemerintahan Kota Batu berharap mampu melakukan pelayanan terpadu kepada masyarakat. Akan tetapi, terdapat Unit Pelayanan Teknis Dinas (UPTD) yang belum ditampung pada block office tersebut. UPTD yang belum tertampung yaitu UPTD Pemadam Kebakaran, untuk menindaklanjuti kebijakan pelayanan terpadu tersebut maka dilakukan pembangunan gedung UPTD Pemadam Kebakaran di komplek block office Kota Batu. Berdasarkan adanya pembangunan tersebut, maka Tugas Akhir ini bertujuan untuk mengetahui pengembangan rencana dan perhitungan preliminary struktur untuk pembangunan Gedung Dinas Pemadam Kebakaran Kota Batu.

Pada Tugas Akhir ini menggunakan metode deskriptif-kuantitatif, dengan teknik pengumpulan data menggunakan studi literatur, wawancara, dokumentasi, dan analisis data bersifat kuantitatif/ perhitungan.

Setelah dilakukan analisis terhadap data, didapatkan beberapa jenis ruang yang dikelompokkan menjadi dua zona yaitu Zona administrasi dan pelayanan (lantai 1 dan 2), serta Zona penunjang kedinasan (lantai 3). Setelah itu, selanjutnya disusun gambar pengembangan rencana, dimana gambar yang dihasilkan yaitu Gambar Situasi, Rencana Tapak, Denah Lantai, Tampak, Potongan, Rencana Kusen, Rencana Pondasi, Rencana Sloof, Rencana Kolom, Rencana Balok, Rencana Pelat, Portal, Detail Pondasi, Tabulasi Detail Penulangan Balok, Kolom, dan Pelat. Gambar struktural berdasarkan perhitungan preliminary, dimana hasil perhitungan preliminary struktur  yaitu Balok Induk 1 (300/550 mm), Balok Induk 2 (200/300 mm), Balok Anak (200/250 mm), Pelat lantai (tebal 120 mm), Pelat Atap (tebal 100 mm), Kolom tipe 1 (300x300 mm), dan Kolom tipe 2 (200x200 mm).

Based on the Terms Of Reference (KAK) of the hangar building stage 1, the Batu City Government hopes to be able to provide integrated services to public. But, there is a Technical Service Unit (UPTD) that hasn’t been accommodated in the block office. UPTD that hasn’t yet been accommodated, is the Fire Department UPTD, to follow up on the integrated service policy, the building of the Fire Department UPTD was built in the Batu City block office complex. Based on the construction, this Final Project is intended to find out the results of development planning drawings and preliminary structural calculations for the construction of the Batu City Fire Department Building.

 In this Final Project using quantitative-descriptive methods, data collection using literature studies, interviews, documentation, and quantitative quantitative data analysis.

After analyzing the data, several types of spaces are taken which are grouped into two zones, namely Administration and service zones (1st and 2nd floors), and Supporting service zones (3rd floor). After that, the plan development drawings are then compiled, while the resulting drawings are Situation Drawings, Site Plan, Floor Plan, Facade, Cutout, Sills Plan, Foundation Plan, Sloof Plan, Column Plan, Beam Plan, Slab Plan, Portal, Foundation Detail, Reinforcement Beams, Column, and Slab tabulation. Structure drawings are based on the preliminary calculation, where the preliminary structure calculation results are the Beam 1 (300/550 mm), Beam 2 (200/300 mm), Secondary Beam (200/250 mm), Floor Slab (120 mm thick), Roof Slab (100 mm thick), Column type 1 (300x300 mm), and Column type 2 (200x200 m).

Keywords: Fire Department, Preliminary Structure, Development Plan Drawings