Pengaruh Suhu Terhadap Kemurnian Hidroksiapatit Berdasar Cangkang Telur Ayam Ras Dengan Metode Sol-gel
Biokeramik dapat disintesis dari bahan yang kaya akan kalsium, seperti cangkang telur ayam ras, tulang ikan, cangkang kerang, dan cangkang telur. Salah satu bahan yang berpotensi sebagai bahan biokeramik yang mudah didapat adalah kulit telur ayam.
Pada penelitian saat ini menggunakan metode sol-gel dan sumber kalsium yang dipakai adalah Cangkang telur ayam ras. Suhu sintering sangat memengaruhi kualitas hidroksiapatit. Pada penelitian ini hidroksiapatit dilakukan proses kalsinasi pada suhu 1000°C selama 3,5 jam. Lalu di lakukan sintering selama 6,5 jam dengan variasi suhu 550°C, 750°C, dan 950°C. Hasil dari sintetis tersebut akan dikarakterisasi menggunakan X-Ray Diffractometer (XRD) dan dapat diketahui fasanya sedangkan Scanning Electron Microscope (SEM) untuk diuji penentuan morfologinya.
Diperoleh variasi suhu sintering pada proses sol-gel memiliki pengaruh terhadap tingkat kemurnian dan kristalinitas hidroksiapatit yang dihasilkan. Dari uji XRD sample dengan variasi suhu 950°C memiliki tingkat kemurnian 84,2%, dengan kristalinitas sebesar 83,15%. bentuk morfologi yang di dapat, dalam penelitian ini hasil uji SEM menunjukkan bentuk morfologi granular yang beragam dan merapatnya antar partikel seiring meningkatnya variasi suhu, Bentuk terbaik dan juga kerapatan antar partikel terbaik terjadi pada sample dengan variasi suhu 950°C.
Bioceramic can be synthesized from materials rich in calcium, such as chicken egg shells, fish bones, shellfish and egg shells. One material that has potential as a bioceramic material that is easy to obtain is chicken egg shell.
In the current research, the sol-gel method was used and the calcium source used was purebred chicken egg shells. Sintering temperature greatly influence the quality of hydroxyapatite. In this research, hydroxyapatite was subjected to a calcination process at a temperature of 1000°C for 3.5 hours. Then sintering was carried out for 6.5 hours with temperature variations of 550°C, 750°C and 950°C. The synthetic results will be characterized using an X-Ray Diffractometer (XRD) and the phase can be determined while the Scanning Electron Microscope (SEM) will be tested to determine the morphology.
Obtained variations in sintering temperature in the sol-gel process have an influence on the level of purity and crystallinity of the hydroxyapatite produced. From the XRD test, the sample with a temperature variation of 950°C has a purity level of 84.2%, with a crystallinity of 83.15%. The morphological forms obtained, in this study, the SEM test results show a variety of granular morphological forms and the closer together of the particles as temperature variations increase. The best shape and also the best density between particles occur in samples with a temperature variation of 950°C.