EKSPERIMENTAL PENGEMBANGAN SUDUT SUDU BERPENAMPANG LENGKUNG DENGAN VARIASI KELENGKUNGAN TERHADAP KINERJA TURBIN REAKSI ALIRAN VORTEX
EXPERIMENTS IN DEVELOPING CURVED SECTION OF ANGLE SLOPE USING THE CURVATURE OF THE BLADE ANGLE FOR THE WORKING VORTEX OF THE TURBINE CURRENT REACTION
Kebutuhan listrik zaman sekarang semakin meningkat, dengan adanya alat-alat rumah tangga berbasis elektronik. Manusia dalam memenuhi kebutuhan listrik menggunakan energi terbarukan maupun yang tidak terbarukan, namun jaman sekarang manusia sangat pintar memanfaatkan energi alam yang disebut dengan energi terbarukan seperti angin, air, matahari, panas bumi, biofuel. Potensi tenaga air di Indonesia mencapai 75.861 MW. Hal ini menjadi referensi untuk memanfaatkan aliran sungai dengan mengubahnya menjadi aliran vortex. Tujuan dari penelitian ini adalah untuk mengetahui pengaruh dari variasi sudut sudu pada sudu berpenampang lengkung pada turbin reaksi aliran vortex.
Penelitian ini menggunakan metode eksperimental dengan memvariasikan kelengkungan sudut sudu pada sudu berpenampang lengkung 35°, 40°, dan 45° dengan menggunakan kapasitas air 8,069 L/s, 9,413 L/s, dan 10,803 L/s. Variasi pembebanan yang digunakan kenaikan 5000 gram hingga putaran poros pada turbin berhenti sesuai tipe turbin hingga mendapatkan daya dan efisiensi.
Hasil penelitian didapatkan kelengkungan sudut sudu turbin paling optimal sebesar 35° pada kapasitas 10,803 L/s menghasilkan daya sebesar 50,053 Watt pada pembebanan 25000 gram. Efisiensi tertinggi didapatkan pada kelengkungan sudut sudu 35° dengan kapasitas 10,803 L/s menghasilkan efisiensi sebesar 68,76% pada pembebanan 25000 gram. Variasi kelengkungan sudut sudu berpengaruh terhadap kenaikan daya pada turbin reaksi vortex. Hal ini disebabkan karena arah jatuh aliran yang mengenai sudut sudu mendekati sudut tegak lurus maka dorongan yang akan didapat pun bertambah dan putaran lebih kuat sehingga berpengaruh pada daya dan efisiensi turbin.
Kata kunci: Turbin Vortex, Sudu berpenampang Lengkung, Kemiringan Sudut
electricity needs are increasing, with the existence of household electronic appliances. Humans in fulfilling their electricity needs use renewable and non-renewable energy, but nowadays humans are very smart in utilizing natural energy which is called renewable energy such as wind, water, sun, geothermal, biofuel. Hydropower is a type of renewable energy that has the greatest potential compared to other renewable energy sources. The potential for hydropower in Indonesia reaches 75,861 MW. This is a reference for exploiting river flows by converting them into vortex flows. The purpose of this study was to determine the effect of the variation of blade angle on the curved section of the vortex flow reaction turbine.
This study used an experimental method by varying the curvature of the blade angle on the blade with curved sections of 30 °, 35 °, 40 °, and 45 ° using water capacities of 8,069 L / s, 9,413 L / s, and 10.803 L / s. The variation of loading used increases by 5000 grams until the shaft rotation on the turbine stops according to the type of turbine to get power and efficiency.
The results showed that the most optimal turbine blade angle curvature was 35 ° at a capacity of 10.803 L / s to produce a power of 50.053 Watts at a loading of 25000 grams. The highest efficiency is obtained at 35 ° blade angle curvature with a capacity of 10.803 L / s resulting in an efficiency of 68.76% at a loading of 25000 grams. The variation of the blade angle curvature has an effect on the increase in power in the vortex reaction turbine. This is caused by the direction of the flow falling on the blade angle is close to the perpendicular angle, the boost to be obtained is also increased and the rotation is stronger so it affects the power and efficiency of the turbine.
Keywords: Vortex Turbine, Curved Section, Angle Slope