Rancang Bangun Alat Pemberi Makan Otomatis Dan Monitoring Pakan Ikan Gurami Berbasis NodeMCU ESP8266 v3
Design and Build Automatic Feeding Equipment and Gourami Fish Feed Monitoring Based on NodeMCU ESP8266 v3
Pakan merupakan faktor penting yang mempengaruhi pertumbuhan ikan. Pakan dapat mempengaruhi panjang, berat, atau pertambahan volume ikan. Saat ini masih banyak peternak yang memberikan pakan ikan gurami secara manual. Hal ini tentunya mengurangi efisiensi jika peternak memiliki banyak tambak atau memiliki usaha sampingan seperti mengelola sawah atau kebun. Oleh karena itu penelitian ini bertujuan untuk membuat suatu sistem alat pakan ikan dimana alat pakan ikan dapat secara otomatis mengeluarkan pakan pada pukul 07.00 dan 16.00 yang terhubung ke smartphone melalui aplikasi blynk. Sensor load cell digunakan untuk mengetahui berat pakan ikan pada wadah pakan yang dapat dimonitoring secara real time melalui aplikasi blynk dan LCD 16x2. Aplikasi blynk juga dapat memberikan perintah secara manual kepada alat pakan ikan agar dapat bekerja sewaktu-waktu. Modul NodeMCU ESP8266 v3 digunakan sebagai mikrokontroler yang dapat terhubung dengan wi-fi. Sistem monitoring menggunakan aplikasi blynk melalui widget gauge dan widget superchat. Pakan dalam wadah penampung dapat terdeteksi oleh sensor load cell. Berdasarkan hasil pengujian, diperoleh rata-rata error pada load cell pada alat sebesar 1,77% dengan delay salama 1 detik antara blynk dengan motor servo dan motor DC untuk bekerja. Rata-rata pakan yang dapat dikeluarkan oleh sistem adalah 18,2 gram dengan jarak lontar pakan ke kolam sejauh 3 meter hingga 42 cm. Sistem ini juga dapat dioperasikan secara manual dengan memberi perintah pada blynk.
Kata Kunci : NodeMCU ESP8266 V3, Blynk, Load Cell.
Feed is an important factor that affects the growth of fish. The feed can affect the length, weight, or volume gain of fish. Currently, there are still many breeders who feed carp manually. This of course reduces efficiency if the farmer has many ponds or has a side business such as managing rice fields or gardens. Therefore, this study aims to create a system of fish feed equipment where fish feed equipment can automatically dispense feed at 07.00 and 16.00 which is connected to a smartphone via the blynk application. The load cell sensor is used to determine the weight of fish feed in the feed container which can be monitored in real time through the blynk application and 16x2 LCD. The blynk application can also give orders manually to fish feed tools so that they can work at any time. The NodeMCU ESP8266 v3 module is used as a microcontroller that can be connected to wi-fi. The monitoring system uses the blynk application through the gauge widget and the superchat widget. Feed in the container can be detected by the load cell sensor. Based on the test results, the average error in the load cell on the tool is 1.77% with a delay of 1 second between blynk and servo motors and DC motors to work. The average feed that can be released by the system is 18.2 grams with a distance of 3 meters to 42 cm from the feed to the pond. This system can also be operated manually by giving commands to the blynk.
Keywords: NodeMCU ESP8266 V3, Blynk, Load Cell.