Pasir dolomit memiliki CaCO3 dan MgO yang berpotensi sebagai material antibakteri. Pembuatan material antibakteri ini menggunakan metode pemanasan/kalsinasi serbuk dolomit dengan variasi holding time dari 0.5 jam hingga 2.5 pada suhu 700°C. Serbuk dolomit yang dihasilkan dari proses kalsinasi kemudian dikarakterisasi XRD, TEM, BET, PSA dan aktivitas antibakteri untuk mengetahui daya hambat dari bakteri. Hasil pada penelitian ini menunjukkan bahwa serbuk dolomit memiliki luas permukaan sebesar 174,154 m2/g dengan distribusi pori pada proses adsorpsi yaitu 0,00864 cc/g/nm , sedangkan pada proses desorpsi sebesar 0,006984 cc/g/nm, dan ukuran pori yaitu pada rentang 84,94708 - 264,4389 nm yang termasuk dalam kategori makropori. Kurva isotherm yang terbentuk pada proses adsorpsi-desorpsi menunjukkan ujung kurva yang terbuka, dimana dengan ujung kurva yang terbuka ini berarti sampel dolomit memiliki aktivitas antibakteri yang baik. Aktivitas antibakteri pada Bakteri Staphylococcus aureus efektif pada pengamatan dua hari dengan diameter zona hambat sebesar 7,5 mm terbentuk pada konsentrasi 40 g/liter. Sedangkan untuk aktivitas antibakteri pada Bakteri Escherichia coli efektif pada pengamatan satu hari dan dua hari dengan diameter zona hambat yaitu 5,5 mm yang terbentuk di variasi konsentrasi 40 g/liter dan aktivitas antibakteri pada Bakteri Streptococcus mutans lebih efektif pada pengamatan tiga hari dengan variasi konsentrasi 50 g/liter yaitu sebesar 5,25 mm.
Kata Kunci: Kalsinasi, Karakterisasi, Antibakteri
Dolomite sand has CaCO3 and MgO which have the potential as an antibacterial material. The making of this antibacterial material uses the heating/calcination method of dolomite powder with a variation of holding time from 0.5 hours to 2.5 at a temperature of 700°C. The dolomite powder produced from the calcination process were then characterized by XRD, TEM, BET, PSA and antibacterial activity to determine the inhibitory power of bacteria. The results of this study indicated that dolomite powder has a surface area of 174,154 m2/g with a pore distribution in the adsorption process is 0.849471 cc/g/nm, while the desorption process is 0.006984 cc/g/nm, and the pore size is in the range 84.94708 - 264.4389 nm which is included in the macropore category. The isotherm curve formed in the adsorption-desorption process shows the edge of the curve that is open, where with the tip of the curve open this means the sample of dolomite has good antibacterial activity. The antibacterial activity of Staphylococcus aureus Bacteria was effective at two days of observation with a diameter of 7.5 mm inhibition zone formed at a concentration of 40 g/liter. While for the antibacterial activity of Escherichia coli Bacteria effective at two days observation with inhibitory zone diameter of 5.5 mm which was formed in various concentrations of 40 g / liter and antibacterial activity in Streptococcus mutans Bacteria was more effective at three days of observation with a concentration of 50 g/liter which is equal to 5.25 mm.
Keywords: calcination, characterization, Antibacterial