Didalam dunia industri yang sangat maju, khususnya dalam dunia Pendistribusian Tenaga Listrik dituntut agar kinerjanya selalu maksimal. Di Pendistribusian Tenaga Listrik sering dijumpai suatu komponen/alat perangkat instalasi listrik yang bernama Kubikel Tegangan Menengah. Kubikel yaitu suatu komponen instalasi listrik yang dipasang di Gardu Induk atau Gardu Hubung yang mempunyai peran penting fungsi sebagai pemutus, pembagi, pengendali, penghubung, dan pengaman sistem penyaluran tenaga listrik tegangan menengah. Dalam pengoprasian Kubikel Tegangan Menengah dijumpai gangguan dikarenakan kondisi Kubikel Lembab dan Terbakar Contohnya jika Kubikel mengalami kondisi overheat bisa memicu kubikel terbakar sehingga dapat mengganggu proses kerja Kubikel dan memicu suatu kerusakan pada Kubikel. Pada Tugas Akhir ini penulis membuat konsep alat yang dapat memberikan Indikasi/ peringatan potensi yang berbahaya. Sehingga pada kondisi Kubikel tegangan menengah tidak dalam kondisi optimal, alat akan mendeteksi pada saat kubikel mengalami Temperature dan Kelembaban tidak sesuai ketentuan. Sehingga indikasi pada Kubikel tersebut terdapat sensor DHT22 sebagai pendeteksi ancaman bahaya dan buzzer sebagai penanda ketidak sesuaian yang diintegrasikan dengan komponen NodeMCU 8266 sebagai Microcontroller. Sehingga pada tugas akhir ini untuk pengujian sensitivitas sensor suhu yang dikalibrasikan dengan highrometer didapatkan rata-rata nilai error suhu sebesar 1,5% dan rata-rata nilai error kelembaban sebesar 3% sehingga alat akan bekerja apabila mendeteksi suhu mencapai lebih dari 40°C yang selanjutnya indikasi tersebut akan dimonitoring melalui sebuah aplikasi yang berbasis Internet of things.
Kata Kunci : Kubikel, Peringatan Dini, Monitoring, NodeMCU 8266, Buzzer, Sensor DHT22
Abstract
In a highly developed industrial world, especially in the world of Electric Power Distribution, it is required that its performance is always maximized. In the distribution of electric power, it is often found a component/tool of an electrical installation device called a medium voltage cubicle. Cubicle is an electrical installation component that is installed in a substation or substation that has an important function as a breaker, divider, controller, connector, and safety medium-voltage power distribution system. In the operation of the Medium Voltage Cubicles, disturbances are encountered due to the conditions of the Moisture and Burning Cubicles. For example, if the Cubicles experience an overheating condition, it can trigger the cubicle to burn so that it can disrupt the work process of the Cubicles and trigger a damage to the Cubicles. In this final project, the author makes a concept of a tool that can provide indications / warnings of potentially dangerous. So that when the medium voltage cubicle is not in optimal condition, the tool will detect when the cubicle experiences a temperature and humidity that is not in accordance with the provisions. So that the indication in the cubicle is that there is a DHT22 sensor as a hazard detector and a buzzer as a non-conformance marker which is integrated with the NodeMCU 8266 component as a microcontroller. So that in this final project for testing the sensitivity of the temperature sensor calibrated with a highrometer, the average temperature error value is 1.5% and the average humidity error value is 3% so that the tool will work if it detects the temperature reaches more than 40°C. Furthermore, these indications will be monitored through an application based on the Internet of things
Kata Kunci : Cubicle, Early Warning, Monitoring, NodeMCU 8266, Buzzer, Sensor DHT22