Hasil penelitian dari penambahan substitusi limbah las karbit variasi tersebut diperoleh bahwa kuat tekan beton meningkat pada variasi 2% sebesar 3.21 MPa dengan berat volume tertinggi 0.83 gr/cm3 dan resapan air terendah 19.01% pada variasi 2%, semua benda uji pada umur 28 hari. Kuat lentur diperoleh variasi tertinggi pada 2% sebesar 1.21 MPa dan berat jenis 0.83 gr/cm3 pada umur 28 hari.
Penelitian ini dilakukan untuk memanfaatkan limbah karbit pada pembuatan beton ringan agar dapat menggantikan sebagian semen terhadap kuat tekan dan kuat lentur pada benda uji kubus, panel, dan balok. Substitusi limbah las karbit ini memiliki variasi sebesar 0%, 1%, 2%, 3% dan 4% terhadap berat benda uji.
Perkembangan beton ringan pada penerapan elemen non-struktural khususnya terhadap pemilihan bahan pengisi bangunan berupa panel dinding, memberikan alternatif berupa bahan bangunan rendah biaya (low cost). Inovasi ini diterapkan pada produk beton ringan untuk meningkatkan kelemahan beton non-struktural dalam bentuk biaya yang lebih rendah dikarenakan kecepatan pengerjaan lebih cepat, lebih tahan terhadap suhu, berat volume (density) nya lebih ringan, dan mudah dikerjakan (easy of handling).
The results of the addition of variations in karbit waste substitution found that the compressive strength of concrete increased in the variation of 2% by 3.21 MPa with the highest weight volume of 0.83 gr / cm3 and the lowest water absorption 19.01% in the variation of 2%, all specimens at 28 days. Flexural strength obtained the highest variation at 2% at 1.21 MPa and specific gravity of 0.83 gr / cm3 at 28 days.
This research was conducted to utilize carbide waste in the manufacture of lightweight concrete in order to replace some of the cement against compressive strength and flexural strength of the cube, panel and beam specimens. This carbide welding substitution has variation of 0%, 1%, 2%, 3% and 4% of the weight of the specimen.
The development of lightweight concrete in the application of non-structural elements, especially towards the selection of building materials in the form of wall panels, provides an alternative in the form of low cost building materials. This innovation is implemented in lightweight concrete product to improve non-structural concrete weaknesses in the form of lower costs due to faster processing speed, more resistance to temperature, lighter density, and easy of handling.