PENGARUH INLET NOTCH KEDUA TERHADAP DAYA DAN EFISIENSI TURBIN AIR CROSSFLOW POROS HORIZONTAL
THE EFFECT OF THE SECOND INLET NOTCH ON THE POWER AND EFFICIENCY OF THE HORIZONTAL CROSSFLOW WATER TURBINE
Listrik merupakan energi yang sangat dibutuhkan oleh manusia. Masih banyak masyarakat Indonesia yang belum bisa menikmati listrik. PLTMH dipilih sebagai salah satu energi alternatif yang memiliki keunggulan, ramah lingkungan, biaya operasional kecil, dan mengurangi penggunaan bahan bakar fosil. PLTMH adalah suatu pembangkit listrik skala kecil yang menggunakan tenaga air sebagai tenaga penggeraknya seperti saluran irigasi, sungai atau air terjun alam dengan cara memanfaatkan tinggi terjunan (head) dan jumlah debit air. Penelitian ini bertujuan untuk mengetahui pengaruh variasi sudut inlet notch sebagai pengarah aliran air pada turbin, dan berpengaruh terhadap daya dan efisiensi turbin crossflow.
Penelitian ini menggunakan metode eksperimen dengan variasi besar sudut pengarah aliran yaitu 0o, 52,5 o, 57,5 o, dan 62,5o, yang akan diuji dengan pembebanan 5kg, 25kg, 15kg, 20kg, dan 25kg, dengan variasi kapasitas air sebesar 9.885 L/s, 11.804 L/s, 14.32 L/s, 16.15 L/s, dan 18.11 L/s untuk mendapatkan daya dan efisiensi.
Hasil dari penelitian ini didapatkan bahwa turbin dengan Inlet Notch 62,5˚ memiliki daya tertinggi dibandingkan Inlet Notch 57,5˚, 52,5˚, 0˚. Daya tertinggi dihasilkan pada kapasitas 18,11 L/s, dengan daya turbin sebesar 4,673 Watt pada pembebanan 6500 gram. Hal ini dikarenakan pada Inlet Notch 62,5˚ mampu memanfaatkan aliran air dengan baik pada bagian depan turbin yang menghasilkan gaya dorong sehingga mampu memutar turbin dengan rpm tinggi serta torsi yang besar. Efisiensi tertinggi dihasilkan pada variasi Inlet Notch 52,5, lebih baik dibandingkan Inlet Notch 57,5˚,0˚, dan 62,5˚. Efisiensi tertinggi dihasilkan pada kapasitas 14,32 L/s, dengan efisiensi sebesar 79,99% pada pembebanan 4000 gram.
Kata Kunci: Turbin, Crossflow, Inlet Notch, Daya, Efisiensi
Electricity is energy that is needed by humans. There are still many Indonesians who have not been able to enjoy electricity. PLTMH was chosen as one of the alternative energies that has advantages, is environmentally friendly, has low operating costs, and reduces the use of fossil fuels. PLTMH is a small-scale power plant that uses hydropower as its driving force such as irrigation channels, rivers or natural waterfalls by utilizing the waterfall height (head) and the amount of water discharge. This study aims to determine the effect of variations in the inlet notch angle as a guide for water flow in the turbine, and the effect on the power and efficiency of the crossflow turbine.
This study uses an experimental method with a large variation of the flow direction angle, namely 0o, 52.5o, 57.5o, and 62.5o, which will be tested with a load of 5kg, 25kg, 15kg, 20kg, and 25kg, with variations in water capacity of 9,885 L / s, 11,804 L / s, 14.32 L / s, 16.15 L / s, and 18.11 L / s for power and efficiency.
The results of this study show that the turbines with Inlet Notch 57.5˚, 52.5, 0˚, and 62.5˚ have the highest power, namely 62.5˚ Inlet Notch. The highest power is generated at a capacity of 18.11 L / s, with a turbine power of 4.673 Watt at a load of 6500 grams. This is because the 62.5 Inlet Notch is able to make good use of the water flow at the front of the turbine which produces thrust so that it can rotate the turbine with high rpm and large torque compared to the Notch Inlet 0o, 52.5 o, and 57.5 o. The highest efficiency is produced in the 52.5 Inlet Notch variations, followed by the 57.5˚, 0˚, and 62.5˚ Inlet Notches. The highest efficiency is produced at a capacity of 14.32 L / s, with an efficiency of 79.99% at a loading of 4000 grams.
Keywords: Turbine, Crossflow, Inlet Notch, Power, Efficiency