Perkembangan teknologi saat ini semakin banyak memberikan kemudahan pada manusia. Salah satunya adalah pemanfaatan cahaya matahari yang diubah menjadi energi listrik melalui sistem kerja sollar cell atau yang disebut plts.
Sistem kerja alat switching antara sumber pembangkit (plts) dan sumber pln sebagai sumber daya instalasi penerangan menggunakan microcontroller arduino nano ini, pada saat baterai penuh tidak dihubungkan dengan solar cell tegangan baterai sebesar 12,54 volt DC. Apabila tegangan akumilator di turunkan per0,2 volt dari tegangan 12,40 volt sampai 10,8 volt akan mengalami proses switching yang semulanya menggunakan sumber batrai akan pindah menggunakan sumber pln saat tegangan telah mencapai 10,8 volt.
Tujuan dari sistem kerja switching dari plts ke pln ini adalah untuk mengantisipasi apabila sumber dari pln padam kita bisa memakai baterai yang sudah terisi penuh oleh charger dari sollar cell dan menghemat biaya listrik karena memakai 2 sumber listrik yaitu baterai (plts) dan pln
Nowadays, the development of technology provides more convenience in human beings. One of them is the utilization of sunlight converted into electrical energy through the Sollar cell system or the so-called plts.
System work tool switching between source generator (Plts) and source PLN as lighting installation resources using this Arduino Nano microcontroller, at the time the full battery is not connected with a solar cell battery voltage of 12.54 volt DC . When the voltage is increased at Per0,2 volts from a voltage of 12.40 volts to 10.8 volts will undergo a switching process that reorganizations using a Batrai source will be moved using the source of PLN when the voltage has reached 10.8 volts.
The purpose of switching work system from Plts to PLN is to anticipate when the source of the PLN delete we can use a battery that is fully charged by the charger from sollar cell and save electricity costs because it uses 2 power sources ie Battery (plts) and PLN