IMPACT STRENGTH ANALYSIS OF HYBRID COMPOSITE OF COCONUT FIBER AND CORN SHELL FIBER WITH NaOH SOAKING AND USING EPOXY RESIN
Masih banyak nya material plastik yang diaplikasikan pada sistem bumper mobil, dan bodi kendaaraan membuat penggunaan plastik tersebut terkadang masih membutuhkan kekuatan dan ketangguhan yang lebih dan terbilang tidak ramah lingkungan. Oleh karena itu perlu pengembangan penggunaan material komposit yang ramah lingkungan dan biasa didaur ulang seperti komposit serat alam. Tujuan penelitian ini adalah untuk mengetahui pengaruh variasi fraksi volume dan lama waktu perendaman NaOH terhadap kekuatan impak komposit epoksi berpenguat serat sabut kelapa dan serat kulit jagung.
Jenis penelitian ini adalah penelitian eksperimen dengan menggunakan metode kuantitatif. Material komposit pada penelitian ini terdiri dari campuran resin bisphenol A-epichlorohydin sebagai matriks dan serat sabut kelapa , serat kulit jagung sebagai filler . Proses pembuatan komposit menggunakan variasi fraksi volume serat dengan persentase 10%SK:30% SJ, 20%SK: 20SJ, dan 30%SK : 10%SJ dan dan lama waktu perendaman larutan NaOH 5% selama 2 jam dan 4 jam. Pembuatan komposit menggunakan metode Hand Lay-Up. Pengujian dilakukan dengan menggunakan uji impak berdasarkan standar ASTM D6110. Analisa data dilakukan berdasarkan hasil dari uji impak dan Analisa kegagalan pada komposit dimana hasilnya berupa data kuantitatif yang akan dibuat dalam bentuk tabel dan ditampilkan dalam bentuk grafis, lalu data tersebut dideskripsikan sebagaimana adanya dalam bentuk kalimat yang mudah dipahami.
Berdasarkan hasil pengujian spesimen dan analisis data diketahui bahwa kekuatan impak tertinggi diperoleh pada variasi fraksi volume serat 30SK : 10%SJ dan lama waktu perendaman NaOH 2 jam, yaitu sebesar 0,260J/mm2 , Sedangkan nilai kekuatan impak terendah didapatkan oleh material komposit dengan variasi fraksi volume 10%SK : 30% SJ dan dan lama waktu perendaman NaOH 4 jam, yaitu sebesar 0,215J/mm2. Perbandingan frkasi volume 30% SK:10%SJ memiliki kekuatan impak yang tinggi dari pada 10%SK: 30%SJ , demikian lama waktu perendaman NaOH 2 jam memiliki kekuatan yang lebih merata di segala arah serat. daripada perendaman NaOH selama 4 jam .
Kata kunci : Alkalisasi, Fraksi Volume, komposit hibrid,Serat Sabut Kelapa, Serat Kulit Jagung.
There are still many plastic materials applied to the car bumper system, and the vehicle body makes the use of plastic sometimes still requires more strength and toughness and is considered not environmentally friendly. Therefore, it is necessary to develop the use of environmentally friendly and recycled composite materials such as natural fiber composites. The purpose of this study was to determine the effect of variations in volume fraction and duration of NaOH immersion on the impact strength of epoxy composites reinforced with coconut fiber and corn husk fiber.
This type of research is experimental research using quantitative methods. The composite material in this study consisted of a mixture of bisphenol A-epichlorohydin resin as a matrix and coconut fiber, corn husk fiber as filler. The composite manufacturing process uses variations in fiber volume fractions with a percentage of 10% SK: 30% SJ, 20% SK: 20SJ, and 30% SK: 10% SJ and the duration of immersion in 5% NaOH solution for 2 hours and 4 hours. Composite manufacturing uses the Hand Lay-Up method. Testing was carried out using impact testing based on ASTM D6110 standards. Data analysis was carried out based on the results of impact testing and failure analysis on composites where the results were in the form of quantitative data that would be made in the form of tables and displayed in graphical form, then the data was described as it is in the form of sentences that are easy to understand.
Based on the results of specimen testing and data analysis, it is known that the highest impact strength was obtained at the variation of the fiber volume fraction 30SK: 10% SJ and the duration of NaOH immersion of 2 hours, which is 0.260J / mm2, while the lowest impact strength value was obtained by the composite material with a variation of the volume fraction 10% SK: 30% SJ and the duration of NaOH immersion of 4 hours, which is 0.215J / mm2. The comparison of the volume fraction 30% SK: 10% SJ has a higher impact strength than 10% SK: 30% SJ, thus the duration of NaOH immersion of 2 hours has a more even strength in all directions of the fiber. than soaking in NaOH for 4 hours.
Keywords: Alkalization, Volume Fraction, Hybrid Composite, Coconut Fiber, Corn Husk Fiber.