UJI KARAKTERISTIK MINYAK PIROLISIS BERBAHAN BAKU LIMBAH PLASTIK POLYPROPYLENE
CHARACTERISTICS TEST OF PYROLYSIS OIL MADE FROM POLYPROPYLENE PLASTIC WASTE
Banyaknya penggunaan plastik yang tidak disertai dengan kemampuan mendaur ulang mengakibatkan bertambahnya jumlah plastik dimuka bumi. Plastik memiliki sifat non-biodegradeable. Salah satu metode yang aman adalah pirolisis yang merupakan metode ramah lingkungan karena tidak menghasilkan limbah selama proses berlangsung. Metode ini juga dapat mereduksi sampah hingga 90%. Pirolisis menghasilkan produk berupa arang (char), Minyak, dan gas. Bio-oil yang didapat dari pirolisis dapat digunakan sebagai pengganti bahan bakar fossil. Tujuan penelitian ini untuk menganalisa karakteristik minyak hasil pirolisis plastik polypropylene, pengaruh temperatur reaktor terhadap karakteristik minyak pirolisis, dan membandingkan karakteristik minyak dengan bahan bakar lainya yang meliputi: densitas, viskostas, nilai kalor, flash point, dan cetane number.
Penelitian ini menggunakan metode eksperimen dengan analisis data kualitatif deskriptif yaitu dengan memvariasikan reaktor pada temperatur 350℃, 400℃, dan 450℃ untuk mengetahui karakteristik dari minyak pirolisis yaitu: densitas, viskositas, flash point, nilai kalor, dan cetane number.
Karakteristik minyak pirolisis terbaik yang didapat meliputi densitas pada temperatur reaktor 400℃ yaitu 0,813 kg/l. Viskositas dan nilai kalor pada temperatur reaktor 350℃ yaitu 2,05 cst dan 12380,5 kkal/kg. Flash point dan cetane number pada temperatur reaktor 450℃ yaitu 51,05℃ dan 47,05. Temperatur reaktor sangat berpengaruh terhadap karakteristik minyak pirolisis. Dari hasil perbandingan dapat disimpulkan bahwa karakteristik minyak pirolisis PP mendekati karakteristik dari solar.
Kata Kunci : pirolisis, limbah plastik PP, karakteristik minyak pirolisis, bahan bakar alternatif.
The number of plastics uses that are not accompanied by the ability to recycle has affect an increase the amount of plastic on earth. Plastics have non-biodegradable properties. One safe method is pyrolysis which is an eco-friendly method because it does not produce waste during the process. This method can also reduce waste by up to 90%. Pyrolysis produces products in the form of charcoal (char), oil, and gas. Bio-oil from pyrolysis can be used as a substitute for fossil fuels. The purpose of this study was to analyze the characteristics of oil produced by pyrolysis polypropylene plastic, the influence of reactor temperature on the characteristics of pyrolysis oil, and compare oil characteristics with other fuels include: density, viscostas, heat value, flash point,and cetane number.
This study uses experimental methods with descriptive qualitative data analysis, namely by applying reactors at temperatures of 350°C, 400°C, and 450°C to determine the characteristics of pyrolysis oil, namely: density, viscosity, flash point, heat value, and cetane number.
The best pyrolysis oil characteristics obtain are density at reactor temperature of 400°C which is 0.813 kg / l. Viscosity and heat values at reactor temperature 350°C which is 2.05 cst and 12380.5 kcal/kg. Flash
points and cetane numbers at reactor temperatures of 450°C which is 51.05°C and 47.05. The temperature of the reactor affects the characteristics of pyrolysis oil. From the results of the comparison, it can be concluded that the characteristics of PP pyrolysis oil are close to the characteristics of diesel.
Keywords: pyrolysis, PP plastic waste, characteristics of pyrolysis oi alternative fuels.