Kubikel merupakan suatu peralatan listrik yang terdapat pada gardu hubung. Kubikel memiliki fungsi sebagai pembagi, pemutus, penghubung dan sebagai kontrol. Semakin meningkatnya kinerja kubikel maka semakin besar nilai suhu yang dihasilkan oleh komponen pada kubikel. Suhu yang tinggi pada peralatan yang ada pada kubikel akan berpengaruh pada kinerja peralatan dan suhu yang yang tinggi juga dapat menimbulkan kelembaban. Suhu dan kelembaban yang ada pada kubikel harus terjaga pada keadaan yang telah ditentukan agar tidak mempengaruhi kinerja peralatan yang ada pada kubikel. Untuk mengetahui nilai suhu pada kubikel maka dilakukan pemeliharan harian.
Hal yang menjadi kekurangan dalam metode untuk mengetahui keadaan suhu kubikel adalah kurangnya efisiensi dalam proses pengecekkan, dimana petugas harus melakukan pengecekkan secara langsung dan pengecekkan dilakukan setiap hari sesuai dengan standart pemeliharaan peralatan.
Tujuan pada penelitian ini yaitu menerapkan sistem monitoring untuk mempermudah kerja petugas dalam melakukan pengecekan suhu dan kondisi dalam kubikel. Hasil dari penelitian yang telah dilakukan, Rancang bangun alat pendeteksi suhu dan kelembaban sebagai pencegahan kegagalan isolasi pada kubikel berhasil dibuat dengan melakukan uji coba , uji coba dilakukan dengan cara meletakan salah satu sensor pada kotak tertutup yang didalamnya diletakan hairdryer menyela untuk mendapatkan suhu yang tinggi dan menimbulkan perbedaan hasil sensor satu dengan sensor yang lain. Setelah melakukan uji coba, didapatkan hasil berupa nilai suhu yang akan dijadikan notifikasi keadaan kubikel. Kondisi kubikel dikatakan dalam keadaan baik ketika suhu yang dideteksi kurang dari 250, ketika suhu kurang dari 400 maka kondisi kubikel dinyatakan dalam keadaan rencana perbaikan dan ketika suhu mencapai 700 maka kubikel dinyatakan dalam kondisi segera perbaikan.
Cubicle is an electrical equipment contained in a connecting substation. Kubikel has a function as a divider, breaker, connector and as a control. The higher the cubicle performance, the greater the temperature value generated by the component in the cubicle. High temperatures on the equipment in the cubicle will affect the performance of the equipment and high temperatures can also cause moisture. the temperature and humidity in the cubicle must be maintained in a predetermined state so as not to affect the performance of the equipment on the cubicle. To determine the temperature value of the cubicle, daily maintenance is carried out.
The thing that is lacking in the method for knowing the temperature of the cubicle temperature is the lack of efficiency in the checking process, where the officer must check directly and check it done every day in accordance with the standard maintenance of equipment.
The purpose of this study is to implement a monitoring system to facilitate the work of officers in checking temperature and conditions in cubicles. The results of the research that has been carried out, the design of temperature and humidity detection devices as prevention of isolation failure on the cubicles was successfully made by conducting a trial, the experiment was carried out by placing one sensor in a closed box where the hairdryer was interrupted to get a high temperature and different sensor results with other sensors. After conducting a trial, the results are in the form of temperature values that will be used as a notification of the cubicle condition. The condition of the cubicle is said to be in good condition when the temperature detected is less than 250, when the temperature is less than 400 then the cubicle condition is stated in the state of repair plan and when the temperature reaches 700 then the cubicle is declared in an immediate repair condition.