Penelitian ini bertujuan untuk membuat kit eksperimen untuk menentukan gaya sentripetal berbasis mikrokontroler. Dari hasil pengukuran kecepatan sudut, jari-jari dan massa. Kit eksperimen terdiri dari sistem mekanik dari hasil pengukuran dan elektronik. Sistem mekanik meliputi motor DC 12 volt sebagai sistem penggerak lengan massa. Sistem elektronik meliputi sensor Load cell untuk mengukur nilai gaya sentripetal, sensor TCRT5000 sebagai photogate untuk mengukur kecepatan sudut. Pengambilan data dilakukan dengan beberapa perubahan variabel diantaranya percobaan pertama untuk mengetahui hubungan gaya sentripetal terhadap perubahan massa dengan perubahan nilai massa dari 0.04 kg - 0.24 kg sehingga diperoleh ketidak pastian maksimal sebesar 0.83 %. Percobaan kedua untuk mengetahui hubungan gaya sentripetal terhadap kecepatan sudut dengan perubahan nilai kecepatan sudut dari 84.84 Rad/s – 460.30 Rad/s dan didapatkan ketidak pastian maksimal sebesear 0.63 %. Percobaan ke tiga untuk mengetahui hubungan gaya sentripetal terhadap jari-jari dengan perubahan nilai jari-jari dari 0.04 m – 0.12 m dan didapatkan ketidak pastian maksimal sebesar 0.83 %. Hasil pengukuran gaya sentripetal oleh sensor load cell diabndingkan dengan teori
Kata Kunci : Kata Kunci : Gaya sentripetal, Kecepatan sudut, Photogate dan Mikrokontroler
This study aims to create an experimental kit to determine the centripetal force based on the microcontroller. From the results of measurement of angular velocity, radius and mass. The experimental kit consists of a mechanical system of measurement and electronic results. The mechanical system includes a 12 volt DC motor as a mass arm drive system. The electronic system includes a Load cell sensor to measure the value of centripetal force, TCRT5000 sensor as a photogate for measuring angular velocity. Data retrieval is done with several changes in variables including the first experiment to determine the relationship of centripetal force to changes in mass with changes in mass values from 0.04 kg - 0.24 kg so that the maximum uncertainty of 0.83% is obtained. The second experiment was to determine the relationship of the centripetal force to angular velocity with changes in angular velocity values from 84.84 Rad / s - 460.30 Rad / s and the maximum uncertainty was 0.63%. The third experiment was to determine the relationship of the centripetal force to the radius with changes in the value of the radius from 0.04 m - 0.12 m and obtained a maximum uncertainty of 0.83%. The measurement results of centripetal force by the load cell sensor are compared with the theory
Key Word : Centripetal force, Anguler velocity, Photogate, Microcontroller