PENGARUH HOLDING TIME PWHT TERHADAP KEKUATAN TARIK DAN KETANGGUHAN PADA PENGELASAN SMAW PLAT BAJA S45C
EFFECT OF PWHT HOLDING TIME ON TENSILE STRENGTH AND TOUGHNESS IN SMAW WELDING OF S45C STEEL PLATES
Perkembangan teknologi yang terus semakin maju mendorong semua pihak untuk melakukan peningkatan kualitas dalam segala hal, terutama dalam hal hasil konstruksi maupun industri. Dalam dunia konstruksi dan industri tentunya berhubungan dengan proses pengelasan yang berpengaruh terhadap kualitas hasil las. Tujuan dari penelitian ini yakni guna mengetahui nilai kekuatan tarik dan ketangguhan dari hasil pengelasan baja S45C dengan proses annealing, variasi holding time.
Pada jenis penelitian yang digunakan kali ini yaitu jenis penelitian eksperimen. Bahan yang digunakan pada penelitian ini yaitu material S45C yang dilas menggunakan SMAW. Pengujian yang dilakukan yaitu pengujian tarik dan impak. Kemudian, variasi yang digunakan yaitu lama waktu penahanan annealing selama 30 menit, 60 menit dan 90 menit. Metode statistika yang dipilih yaitu analysis of variance (anova) one way untuk mengetahui ada tidaknya pengaruh signifikan holding time PWHT terhadap kekuatan tarik dan ketangguhan pada pengelasan.
Hasil penelitian ini adalah terdapat pengaruh siginifikan pada hasil pengelasan SMAW pada baja S45C yang melalui proses PWHT dengan variasi holding time dan yang tanpa melalui proses PWHT terhadap kekuatan tarik. Nilai kekuatan tarik tertinggi pada spesimen tanpa proses PWHT dengan nilai 536,42 MPa dan nilai kekuatan tarik terendah pada spesimen dengan variasi holding time PWHT 90 menit sebesar 421,10 MPa. Serta terdapat pengaruh yang signifikan pada variasi holding time PHWT pada baja S45C terhadap nilai ketangguhan dengan nilai ketangguhan tertinggi 0,897 J/mm2 pada spesimen dengan variasi holding time PWHT 90 menit dan nilai ketangguhan terendah 0,355 J/mm2 pada spesimen tanpa mengalami proses PWHT . Parameter holding time PWHT memberikan pengaruh yang signifikan pada kekuatan tarik dan ketangguhan, semakin lama waktu holding time yang digunakan maka semakin menurunkan tegangan sisa sehingga menurunkan hasil dari nilai uji tarik tetapi disisi lain nilaiketangguhanya meningkat.
Continuously advancing technological developments encourage all parties to improve quality in all things, especially in terms of construction and industrial results. In the world of construction and industry, it is certainly related to the welding process which influences the quality of the weld results. The aim of this research is to determine the tensile strength and toughness values of the welding results of S45C steel using the annealing process, varying holding time.
The type of research used this time is experimental research. The material used in this research is S45C material which is welded using SMAW. The tests carried out were tensile and impact testing. Then, the variation used is the length of annealing holding time for 30 minutes, 60 minutes and 90 minutes. The statistical method chosen is one way analysis of variance (ANOVA) to determine whether there is a significant effect of holding time PWHT on tensile strength and toughness in welding.
The results of this study are that there is a significant effect on the results of SMAW welding on S45C steel that goes through the PWHT process with variations in holding time and without going through the PWHT process on tensile strength. The highest tensile strength value was on the specimen without the PWHT process with a value of 536.42 MPa and the lowest tensile strength value on the specimen with a 90 minute PWHT holding time variation of 421.10 MPa. Also, there is a significant effect on the variation of holding time PHWT on S45C steel on the toughness value with the highest toughness value of 0.897 J/mm2 on specimens with variations of PWHT holding time of 90 minutes and the lowest toughness value of 0.355 J/mm2 on specimens without undergoing PWHT process. The PWHT holding time parameter has a significant effect on tensile strength and toughness, the longer the holding time used, the lower the residual stress thereby reducing the result of the tensile test value but on the other hand the toughness value increases.