PENGARUH SUBSTITUSI STEEL SLAG TERHADAP KUAT TEKAN DAN DAYA SERAP AIR PADA PAVING BLOK
THE EFFECT OF STEEL SLAG SUBSTITUTION ON COMPRESSIVE STRENGTH AND WATER ABSORPTION IN PAVING BLOCKS
Peningkatan aktivitas industri baja menghasilkan limbah yang tergolong limbah B3 (berbahaya, beracun, dan berbau), sehingga berpotensi merusak lingkungan. Sesuai dengan Peraturan Pemerintah Nomor 74 Tahun 2001 dan Peraturan Pemerintah Nomor 18 dan 85 Tahun 1999, limbah dari industri baja harus dikelola dengan benar melalui metode seperti proses termal, stabilisasi, solidifikasi, serta pengolahan kimia, fisika, dan biologi untuk meminimalkan dampaknya.
Metode penelitian yang digunakan adalah metode eksperimen dengan benda uji, yaitu paving blok yang di buat dengan mengganti sebagian agregat halus dengan agregat halus buatan dari steel slag Penelitian ini menggunakan substitusi steel slag sebesar 0%, 10%, 15%, dan 20% dari pasir, dengan tujuan untuk mengetahui pengaruh terhadap kuat tekan, daya serap air, serta proporsi steel slag paling optimum pada paving blok.
Hasil penelitian menunjukkan bahwa substitusi steel slag hingga 10% meningkatkan kuat tekan dan menurunkan daya serap paving blok, dengan hasil terbaik pada proporsi 10%. Melebihi 10%, kuat tekan menurun dan daya serap meningkat. Jadi, proporsi optimal steel slag adalah 10%.
The increase in steel industry activity produces waste that is classified as B3 waste (hazardous, toxic, and odorous), so it has the potential to damage the environment. In accordance with Government Regulation Number 74 of 2001 and Government Regulation Number 18 and 85 of 1999, waste from the steel industry must be managed properly through methods such as thermal processes, stabilization, solidification, and chemical, physical, and biological processing to minimize its impact.
The research method used is an experimental method with test objects, namely paving blocks made by replacing some of the fine aggregate with artificial fine aggregate from steel slag. This study used steel slag substitution of 0%, 10%, 15%, and 20% of sand, with the aim of determining the effect on compressive strength, water absorption, and the most optimum proportion of steel slag in paving blocks.
The results showed that steel slag substitution of up to 10% increased compressive strength and decreased the absorption capacity of paving blocks, with the best results at a proportion of 10%. Exceeding 10%, compressive strength decreased and absorption capacity increased. So, the optimal proportion of steel slag is 10%.