Perbandingan Daya Dukung Pondasi Raft Menggunakan Metode Poulos Dan Software Plaxis Pada Bangunan Gedung
Comparison of the Load-Bearing Capacity of Raft Foundations Using the Poulos Method and Plaxis Software on Building Structures
Fondasi rakit ( Raft foundation ) didefinisikan sebagai pelat beton yang digunakan untuk mempersatukan satu atau lebih kolom dalam beberapa baris. Evaluasi terhadap perhitungan daya dukung fondasi raft penting dilakukan dalam proses perencanaan dan konstruksi, untuk memastikan bahwa fondasi tersebut mampu mendistribusikan kolom – kolom dan dinding dalam suatu tanah. Pada penelitian ini dilakukan pemodelan software Plaxis 3D untuk daya dukung fondasi raft , Metode Poulus & Davis untuk mengetahui perbandingan nilai daya dukung penurunan. Penelitian ini menggunakan data NSPT dan parameter tanah dalam penentuan daya dukung fondasi. Dari hasil perhitungan manual metode Poulus & Davis nilai penurunan didapatkan nilai sebesar 124,09 m atau 12,4 cm sedangkan untuk perbandingan software Plaxis 3D didapatkan nilai penurunan sebesar 0,1303 m atau 13,3 cm dan mempunyai nilai percentase sebesar 10,3%.
Raft foundation is defined as a concrete slab used to unify one or more columns in several rows. Evaluation of the bearing capacity calculations of raft foundations is essential in the planning and construction process to ensure that the foundation can distribute the columns and walls onto the ground. In this study, the Plaxis 3D software modeling was performed for the bearing capacity of the raft foundation, and the Poulus & Davis Method was used to determine the comparison of settlement bearing capacity values. This research uses NSPT data and soil parameters in determining the bearing capacity of the foundation. From the manual calculations using the Poulus & Davis method, a settlement value of 124.09 m or 12.4 cm was obtained, while for the comparison with Plaxis 3D software, a settlement value of 0.1303 m or 13.3 cm was obtained, resulting in a percentage difference of 10.3%.