ANALISIS PENGARUH JENIS SAE (VISKOSITAS) OLI BEKAS TERHADAP WAKTU KONSUMSI DAN TEMPERATUR PADA ALAT KOMPOR OLI BEKAS
ANALYSIS OF THE EFFECT OF THE TYPE OF SAE (VISCOSITY) OF USED OIL ON THE CONSUMPTION TIME AND TEMPERATURE OF THE USED OIL STOVE APPLIANCE
Penelitian ini mengkaji pengaruh jenis SAE (viskositas) oli bekas sebagai bahan bakar pada kompor oli bekas terhadap waktu konsumsi dan temperatur pembakaran, serta mempelajari cara pengujian viskositas oli bekas menggunakan viscometer Ostwald. Masalah pencemaran lingkungan oleh oli bekas menjadi perhatian utama karena merusak kualitas air tanah dan membunuh mikroorganisme penting.
Metode penelitian menggunakan eksperimen dengan tiga jenis oli bekas (SAE 5W-30, 10W-40, 20W-50). Pengujian viskositas dilakukan menggunakan viscometer Ostwald, lalu oli bekas digunakan sebagai bahan bakar kompor, dan diukur waktu konsumsi serta temperatur pembakarannya.
Hasil menunjukkan bahwa semakin tinggi viskositas oli, semakin lama waktu aliran dalam viscometer dan semakin tinggi temperatur pembakaran. Waktu aliran rata-rata untuk air, oli 5W-30, 10W-40, dan 20W-50 masing-masing adalah 1.08, 5.22, 5.72, dan 6.23 detik. Waktu konsumsi rata-rata untuk oli 5W-30, 10W-40, dan 20W-50 adalah 2182, 2240, dan 2357 detik, dengan temperatur pembakaran berturut-turut 821.23°C, 831.37°C, dan 848.77°C. Kesimpulannya, semakin tinggi viskositas oli, semakin lama waktu konsumsi dan semakin tinggi temperatur pembakaran.
Kata Kunci : Jenis SAE, Oli bekas, Viscometer Ostwald, Viskositas oli
This research examines the effect of SAE type (viscosity) of used oil as fuel in used oil stoves on consumption time and combustion temperature, and studies how to test the viscosity of used oil using an Ostwald viscometer. The problem of environmental pollution by used oil is a major concern because it damages groundwater quality and kills important microorganisms.
The research method used experiments with three types of used oil (SAE 5W-30, 10W-40, 20W-50). Viscosity testing was conducted using an Ostwald viscometer, then the used oil was used as stove fuel, and the consumption time and combustion temperature were measured.
The results showed that the higher the viscosity of the oil, the longer the flow time in the viscometer and the higher the combustion temperature. The average flow times for water, 5W-30, 10W-40, and 20W-50 oils were 1.08, 5.22, 5.72, and 6.23 seconds, respectively. The average consumption times for 5W-30, 10W-40, and 20W-50 oils were 2182, 2240, and 2357 seconds, with combustion temperatures of 821.23°C, 831.37°C, and 848.77°C, respectively. In conclusion, the higher the oil viscosity, the longer the consumption time and the higher the combustion temperature.
Keywords : Oil viscosity Ostwald viscometer , Used oil , SAE type