Impeller merupakan salah satu bagian terpenting dari pompa sentrifugal yang dapat mempengaruhi performa pompa. Hal yang perlu dilihat dari performa pompa adalah nilai efisiensi, NPSH, Head dan kebisingan dari pompa. Penambahan riblet dengan memberikan alur dalam pada sudu impeller dapat meningkatkan performa dari pompa tetapi untuk lebih mengetahui performa pompa sentrifuggal dengan cara memvariasi kecepatan motor dan temperatur air. Tujuan dari penelitian performa pompa sentrifugal, agar dapat menganalisis pengaruh variasi bentuk alur dalam, variasi kecepatan dan temperaur terhadap performa pompa sentrifugal.
Variabel bebas dalam penelitian ini adalah variasi bentuk alur dalam pada impeller, variasi kecepatan dan variasi temperatur air. Dalam variasi alur dalam menggunakan impeller jumlah sudu 8 tanpa alur, sudu 8 dengan riblet beralur dalam lurus dan riblet beralur dalam sinusoidal riblet width (w) = 2 mm, Spacing (s) = 3,4 mm, Height (h) = 1,7 mm. Variasi kecepatan putar motor yaitu 1500, 2000 dan 2500 rpm sedangkan variasi temperatur air 30°C, 45°C, 60°C.
Dalam penelitian ini penambahan alur dalam pada impeller memberi dampak positif pada kapasitas, head, npsh dan juga efisiesi pompa. Untuk impeller dengan alur dalam sinusoidal mendapatkan nilai kapasitas, head, npsh dan juga efisiesi pompa tertinggi yaitu 54 LPM, 13,04 m dan efisiensi pompa 49,38 % berada pada suhu 30°C dan kecepatan 2500 RPM sedangkan nilai npsh 9,99 m pada suhu 30°C dan kecepatan 1500 RPM. Pada impeller alur dalam lurus menghasilkan efisiensi pompa 47,04%, nilai head 12,42 m pada suhu 30°C kecepatan 2500 RPM dan sedangkan nilai npsh 9,73 m pada suhu 30°C dan kecepatan 1500 RPM. Dan nilai kebisingan yang paling rendah adalah 65,7 dB berada pada kecepatan 1500 RPM di semua impeller.
Kata Kunci: pompa sentrifugal, riblet, npsh, efisiensi
The impeller is one of important for sentrifugal pump, it can be influence for performance of pump. Things that need to be seen from the pump's performance are the value of efficiency, NPSH, Head and noise from the pump. The addition of a riblet by giving a deep groove to the impeller blade can improve the performance of the pump but to better know the performance of the centrifuge pump by varying the motor speed and water temperature. The purpose of the research is the performance of centrifugal pumps, to be able to analyze the effect of variations in the shape of deep grooves, variations in speed and temperaur on the performance of centrifugal pumps.
The independent variables in this research are variations in the shape of the deep grooves on the impeller, variations in speed and variations in water temperature. In the variation of grooves in using impeller the number of blades 8 without grooves, blade 8 with riblets grooved in straight and grooved riblets in sinusoidal riblet width (w) = 2 mm, Spacing (s) = 3.4 mm, Height (h) = 1, 7 mm. Motor rotational speed variations are 1500, 2000 and 2500 rpm while water temperature variations are 30 ° C, 45 ° C, 60 ° C.
In this research the addition of deep grooves to the impeller has a positive impact on capacity, head, NPH and also pump efficiency. For impeller with sinusoidal groove, the highest value of capacity, head, npsh and also pump efficiency is 54 LPM, 13.04 m and pump efficiency is 49.38% at 30 ° C and speed of 2500 RPM while the npsh value is 9.99 m at a temperature of 30 ° C and a speed of 1500 RPM. In a straight deep groove impeller produces a pump efficiency of 47.04%, a head value of 12.42 m at a temperature of 30 ° C with a speed of 2500 RPM and while the npsh value of 9.73 m at a temperature of 30 ° C and a speed of 1500 RPM. And lowest noise is 65.7 dB obtained at a speed of 1500 rpm all impeller.
Keywords: centrifugal pump, riblet, NPSH, efficiency.