Analisa Numerik Kekuatan Rangka Mesin Pencampur Ragi Tempe
Numerical Analysis of Frame Strength of Tempe Yeast Mixing Machine
Mesin pencampur ragi tempe merupakan mesin yang digunakan untuk mempermudah pengrajin tempe dalam prosen pembuatan tempe. Dibutuhkan perencanan matang dalam pemilihan material rangka mesin tersebut agar rangka mesin tersebut kuat dan kokoh. Penulis meneliti tentang stress, displacement dan nilai faktor keamanan dari mesin pencampur ragi tempe dengan variasi material. Pada penelitian ini penulis menggunakan metode penelitian analisis data kuantitatif deskriptif dengan menggunakan elemen hingga menggunakan aplikasi SolidWorks 2020. Material yang digunakan adalah Stainless Steel 201 dan AISI 1045 dengan ukuran hollow 40 mm x 40 mm x1,5 mm. Hasil penelitian ini didapatkan nilai stress max Stainless Steel 201: 126,84 Mpa, sedangkan AISI 1045: 123,35 Mpa. Nilai displacement max Stainless Steel 201: 0,07 mm, sedangkan AISI 1045: 0,06 mm. Nilai faktor keamanan Stainless Steel 201: 2,3, sedangkan AISI 1045: 4,3. Distribusi tegangan terbesar Stainless Steel 201 dan AISI 1045 terletak pada hollow yang langsung bersentuhan dengan beban. Material AISI 1045 lebih kuat daripada Stainless steel 201 karena memiliki nilai stress dan displacement lebih kecil tetapi memiliki faktor keamanan yang lebih besar. Akan tetapi, kedua material ini aman karena masih jauh dari nilai yield strength nya. dan memiliki faktor keamanan yang memenuhi minimum faktor keamanan (>1).
The tempeh yeast mixing machine is a machine used to facilitate tempeh craftsmen in the tempeh making process. Careful planning is needed in selecting the machine frame material so that the machine frame is strong and sturdy. The author examines the stress, displacement and safety factor values of the tempeh yeast mixing machine with material variations. In this study, the author used a descriptive quantitative data analysis research method using finite elements using the SolidWorks 2020 application. The materials used were Stainless Steel 201 and AISI 1045 with a hollow size of 40 mm x 40 mm x1.5 mm. The results of this study obtained the maximum stress value of Stainless Steel 201: 126.84 Mpa, while AISI 1045: 123.35 Mpa. The maximum displacement value of Stainless Steel 201: 0.07 mm, while AISI 1045: 0.06 mm. The safety factor value of Stainless Steel 201: 2.3, while AISI 1045: 4.3. The largest stress distribution of Stainless Steel 201 and AISI 1045 is located in the hollow that is directly in contact with the load. AISI 1045 material is stronger than Stainless steel 201 because it has a smaller stress and displacement value but has a larger safety factor. However, both of these materials are safe because they are still far from their yield strength values. and have a safety factor that meets the minimum safety factor (> 1).