PENGEMBANGAN MODUL PRAKTIKUM PLC FESTO UNTUK MENUNJANG MATA KULIAH INSTRUMENTASI DAN KENDALI DIJURUSAN TEKNIK MESIN UNESA
FESTO PLC PRACTICUM MODULE DEVELOPMENT TO SUPPORT INSTRUMENTATION AND CONTROL COURSES IN MECHANICAL ENGINEERING DEPARTMENT UNESA
Perkembangan dunia elektronika pada kondisi saat ini mengalami kemajuan yang sangat cepat. Bahkan Hampir semua peralatan baik itu mulai dari rumah tangga hingga peralatan pada dunia indutri menggunakan sistem kendali dari elektronika. Salah satu contoh kemajuan dalam bidang otomasi yaitu Programmable logic control (PLC).Selain itu juga PLC dikenalkan dalam proses pembelajaran didunia pendidikan pada perkuliahan. Dengan adanya media pembelajaran dapat mempermudah peserta didik dalam mempelajari materi tentang PLC serta membeikan kemudahan bagi mahasiswa dalam mempelajari teknologi kontrol kendali.Akan tetapi,untuk panduan pembelajaran praktikum menggunakan PLC FESTO belum tersedia modul atau panduan langkah kerja untuk praktikum sehingga mahasiswa mengalami kesulitan dalam melakukan praktik simulasi control kendali dengan trainer PLC FESTO.
Dalam penelitian ini mengunakan metode model pengembangan ADDIE yang dimana model ini tediri dari 5 tahapan yaitu:Analisis(Analysis),Desain (Design), Pengembangan(Development), Penerapan (Implementation),dan Evaluasi(Evaluation). Instumen yang digunakan untuk penelitian ini guna mengukur kelayakan dari modul ini adalah dengan angket pada dosen ahli materi,ahli desain,ahli bahasa serta respon dari dosen dan mahasiswa.
Hasil dari penelitian ini adalah kelayakan modul dari ahli materi sebesar 3,53 termasuk kategori sangat layak, dari ahli bahasa sebesar 3,21 termasuk dalam kategori layak, dan dai ahli desain sebesar 3,35 termasuk dalam kategori sangat layak. Apabila dirata-rata mendapatkan nilai sebesar 3,36 termasuk dalam kategori sangat layak. Respon mahasiswa terhadap modul praktikum PLC FESTO didapatkan nilai sebesar3,63 termasuk kategori sangat baik. Kemudian hasil rata-rata respon dosen didapatkan nilai sebesar 3,36 termasuk kategori sangat baik. Oleh karena itu,dapat disimpulkan bahwa modul praktikum PLC FESTO dapat digunakan sebagai bahan ajar untuk menunjang mata kuliah Instrumentasi dan Kendali.
Kata kunci: Modul praktikum PLC FESTO ,Model pengembangan ADDIE,Respon mahasiswa dan Dosen.
The development of the world of electronics in current conditions is progressing very quickly. In fact, almost all good equipment, ranging from household appliances to equipment in the industrial world, use a control system from electronics. One example of progress in the field of automation is Programmable logic control (PLC). In addition, PLC was introduced in the learning process in the world of education in lectures. The existence of learning media can make it easier for students to learn material about PLC and provide convenience for students in learning control control technology. However, for practical learning guidelines using PLC FESTO, there is no module or work step guide for practicum so students have difficulty in practicing control simulation with PLC FESTO trainer.
In this study using the ADDIE development model method where this model consists of 5 stages, namely: Analysis(Analysis), Design (Design), Development (Development), Implementation (Implementation), and Evaluation(Evaluation). The instrument used for this research to measure the feasibility of this module is a questionnaire on material expert lecturers, design experts, linguists as well as responses from lecturers and students.
The result of this research is that the module feasibility from material experts is 3.53 which is included in the very feasible category, 3.21 from linguists is included in the appropriate category, and 3.35 from design experts is included in the very feasible category. If the average score is 3.36, it is included in the very feasible category. Student responses to the PLC FESTO practicum module got a score of 3.63 including the very good category. Then the results of the average response of the lecturers obtained a value of 3.36 including the very good category. Therefore, it can be concluded that the FESTO PLC practicum module can be used as teaching material to support Instrumentation and Control courses.
Keywords: FESTO PLC practicum module, ADDIE development model, Student and Lecturer responses.