PENGEMBANGAN PAINTING SPRAYBOOTH MENGGUNAKAN  PEMANAS TUBULAR BERSIRIP DI LABORATORIUM PENGECATAN DAN PERBAIKAN BODI

SPRAYBOOTH PAINTING DEVELOPMENT USING BEEP TUBULAR HEATING AND LABORATORY OF PAINTING AND IMPROVEMENT

Dalam dunia pendidikan khusunya bidang otomotif baik sekolah maupun perguruan tinggi sangat dituntut untuk mengikuti perkembangan. Sebagai contoh di Laboratorium Pengecatan dan Perbaikan Bodi Jurusan Teknik Mesin Fakultas Teknik di Universitas Negeri Surabaya (UNESA) yang telah memiliki spraybooth multifungsi untuk pengecatan dan pengeringan namun belum bisa berfungsi secara optimal. Dari metode pengembangan alat terdapat beberapa perubahan dari rancangan awal yaitu blower berfungsi mengatur sirkulasi udara agar dari pemanas tubular dapat ditransfer keseluruh ruangan, pemanas tubular bersirip digunakan sebagai elemen pemanas untuk menggantikan pemanas burner dari LPG, dan penambahan temperature control serta timer analog. Uji coba timer terhadap waktu dan suhu yang dapat dicapai pada pengembangan painting spraybooth menggunakan pemanas tubular bersirip yaitu 10 menit (31ºC), 20 menit (57ºC) dan 30 menit (68ºC).

Kata Kunci :PaintingSpraybooth, ElemenPemanas. , Pengecatan

In the educational world especially both school and college automotive are highly demanded to keep up with the developments. For example in Laboratory Painting and Repair Body Engineering Department Of Mechanical Engineering at UniversitasNegeri Surabaya (UNESA) that has had multifunctional spraybooth for painting and drying but can not function optimally. From the tool development method There are some changes from the initial design that the blower serves to regulate air circulation so that from the tubular heater can be transferred to the entire room, a finned tubular heater is used as a heating element to replace the burner heater from LPG, adding temperature control as well as an analog timer. The timer trials against the time and temperature can be achieved on the development of painting spraybooth using a finned tubular heater is 10 minutes (31º C), 20 minutes (57º C) and 30 minutes (68º C).

Keywords: Painting Spraybooth, Heating Elements, Painting