Perkembangan teknologi saat ini sangatlah pesat, sehingga banyak teknologi-teknologi baru yang dijumpai disekitar kita. Salah satunya adalah model tanam hydroponic yaitu metode bercocok tanam tanpa tanah. Dalam sistem hydroponic banyak berbagai macam sistem tanam yang dapat digunakannya salah satunya yaitu Nutrient Film Technique (NFT).
Pada metode tanam hidroponik Nutrient Film Technique (NFT) membutuhkan energi listrik yang besar. Utuk mengaliri tanaman dibutuhkan pompa yang secara terus menerus menyala, sehingga membutuhkan inovasi untuk membantu kinerja dari sistem tanam tersebut supaya lebih efisien penggunaan energi listrik dan ramah lingkungan. Inovasi yang dilakukan yaitu pengguna sensor YL69 sebagai kontrol pada pompa dan menggunakan energi surya.
Hasil penelitian ini adalah sebuah rancang bangun sistem otomasi pengatur nutrisi hidroponik nutrient film technique (NFT) menggunakan tenaga surya. Pompa menyala ketika sensor YL69 dibawah nilai yang ditetapkan seber 450, jika sensor membaca sebesar 420 maka pompa akan menyala dan akan menyiram selama 4 menit. Panel surya yang direncanakan sebesar 50Wp mampu mensuplai total bebas sebesar 68,556 Wh dengan kapasitas batterai sebesar 420 Ah. Sehingga batterai yang terpakai sebesar 16,32%.
Kata Kunci : Hidroponic, Nutrient Film Technique (NFT), Energi surya, Arduino UNO,
Current technological developments are very rapid, so many new technologies are found around us. One of them is a hydroponic planting model, which is a method of farming without soil. In many hydroponic systems various kinds of planting systems can be used, one of which is Nutrient Film Technique (NFT).
In the hydroponic planting method the Nutrient Film Technique (NFT) requires large electrical energy. To drain plants, a pump is needed that is continuously lit, so it requires innovation to help the performance of the planting system to be more efficient in using electricity and environmentally friendly. The innovation is the YL69 sensor user as a control on the pump and using solar energy.
The results of this study are a design of the hydroponic nutrient film technique (NFT) nutrition control automation system using solar power. The pump lights up when the YL69 sensor is below the set value of 450, if the reading sensor is 420, the pump will turn on and will flush for 4 minutes. The planned solar panel of 50Wp is able to supply a total free of 68,556 Wh with a battery capacity of 420 Ah. So that the battery used is 16.32%.
Key words: Hydroponics, Nutrient Film Technique (NFT), Solar Energy, Arduino UNO