THE EFFECT OF CALCINATION TEMPERATURE ON CRYSTAL SIZE AND PHASE COMPOSITION OF TiO2 COMPOUNDS
Abstrak. TiO2 atau yang biasa disebut dengan Titanium dioksida merupakan logam transisi yang bersifat semikonduktor. Logam ini secara komersil berbentuk serbuk putih. Bahan ini sering digunakan dalam penelitian pengembangan efek fotokatalis pada suatu material. TiO2 digunakan pada cat sebagai senyawa yang memunculkan sifat self cleaning. Sifat ini adalah sifat suatu material untuk membersihkan dirinya sendiri dari zat pengotor. Self cleaning bekerja dengan bantuan efek fotokatalis. Efek fotokatalis adalah efek yang bekerja dengan bantuan energi foton, sehingga material semikondutor dapat digunakan dalam sifat tersebut. Hal ini dikarenakan Titanium dioksida merupakan suatu senyawa semikonduktor yang memiliki energi celah pita sebesar 3,2 eV untuk fase anastase, dan untuk fase rutil sebesar 3,0 eV. Penelitian ini bertujuan untuk mengetahui adanya pengaruh suhu kalsinasi terhadap karakteristik senyawa TiO2. Pada penelitian ini Titanium (IV) isopropoksida (TTiP) merupakan prekursor untuk sintesis TiO2, dan metode yang digunakan adalah metode sol-gel. Setelah dilakukan sintesis senyawa TiO2, setelah itu TiO2 dikalsinasi pada suhu 400°C, 450°C, 500°C, dan 550°C. Karakterisasi yang dilakukan pada penelitian ini adalah menggunakan spektrofotometer Fourier Transform Infra Red (FTIR) yang berfungsi untuk mengetahui gugus fungsional yang terbentuk dan spektrofotometer X-Ray Driffraction (XRD) yang berfungsi untuk mengetahui komposisi fasa pada senyawa TiO2. Berdasarkan penelitian yang telah dilakukan didapatkan gugus fungsional –OH, Ti-O, dan Ti-O-Ti. Hal ini menunjukan bahwa TiO2 berhasil terbentuk melalui metode sol-gel. Pada analisis fasa didapatkan hasil bahwa TiO2 terdapat pada fasa anastase. Hal ini menunjukan TiO2 dapat berfungsi dengan baik apabila diaplikasikan untuk fotokatalis.
Kata kunci: Titanium Dioksida (TiO2), Suhu Kalsinasi, fotokatalis, Self cleaning
semiconductor transition metal. This metal is commercially in the form of a white powder. This material is often used in research on the development of photocatalyst effects on a material. TiO2 is used in paints as a compound that gives rise to self-cleaning properties. This property is the property of a material to clean itself from impurities. Self cleaning works with the help of the photocatalytic effect. The photocatalyst effect is an effect that works with the help of photon energy, so that the semicondutor material can be used in this property. This is because Titanium dioxide is a semiconductor compound that has a bandgap energy of 3.2 eV for the anastase phase and 3.0 eV for the rutile phase. This study aims to determine the effect of calcination temperature on the characteristics of TiO2 compounds. In this study, Titanium (IV) isopropoxide (TTiP) is a precursor for TiO2 synthesis, and the method used is the sol-gel method. After synthesis of the TiO2 compound, TiO2 is then calcined at 400°C, 450°C, 500°C, and 550°C. The characterization carried out in this study was using the Fourier Transform Infra Red (FTIR) spectrophotometer which functions to determine the functional groups formed and the X-Ray Driffraction (XRD) spectrophotometer which functions to determine the phase composition of TiO2 compounds. Based on the research that has been done, it is found that the functional groups are –OH, Ti-O, and Ti-O-Ti. This shows that TiO2 was successfully formed through the sol-gel method. In the phase analysis, the results showed that TiO2 was present in the anastase phase. This shows that TiO2 can function properly when applied to photocatalysts.
Keywords: Titanium Dioxide (TiO2), Calcination Temperature, photocatalysts, Self cleaning.