Perancangan Unit Sistem Pemanas Mesin Mini Portable Ekstruder Bioplastik
Design of a Heating System Unit for a Mini Portable Bioplastic Extruder Machine
Penggunaan plastik konvensional sebagai bahan kemasan telah menimbulkan dampak
negatif terhadap lingkungan karena sifatnya yang sulit terurai. Sebagai solusi, bioplastik berbasis
Polylactic Acid (PLA) dari pati singkong menjadi alternatif yang ramah lingkungan. Penelitian ini
bertujuan untuk merancang dan menguji unit sistem pemanas pada mesin mini portable ekstruder
bioplastik, guna menghasilkan suhu pemanasan yang stabil untuk proses ekstrusi PLA. Sistem
pemanas menggunakan dua buah band heater dengan total daya 200 W dan dikontrol
menggunakan PID controller untuk menjaga kestabilan suhu. Pengujian dilakukan pada tiga variasi
suhu ekstrusi yaitu 130°C, 140°C, dan 150°C dengan kecepatan screw konstan 60 rpm. Hasil
penelitian menunjukkan bahwa suhu 150°C menghasilkan filamen dengan diameter paling
konsisten (2 mm), permukaan halus, dan waktu produksi tercepat (15 menit). Kesimpulan dari
penelitian ini adalah bahwa sistem pemanas yang dirancang mampu bekerja secara efisien dan
stabil untuk kebutuhan ekstrusi skala kecil.
The use of conventional plastics as packaging materials has caused negative
environmental impacts due to their non-biodegradable nature. As a solution, bioplastics based on
Polylactic Acid (PLA) derived from cassava starch have emerged as an environmentally friendly
alternative. This study aims to design and test a heating system unit for a mini portable bioplastic
extruder machine to achieve stable heating temperatures for the PLA extrusion process. The
heating system utilizes two band heaters with a total power of 200 W, controlled by a PID
controller to maintain temperature stability. Tests were conducted at three different extrusion
temperatures: 130°C, 140°C, and 150°C, with a constant screw speed of 60 rpm. The results
showed that the temperature of 150°C produced the most consistent filament diameter (2 mm),
smooth surface, and the fastest production time (15 minutes). In conclusion, the designed heating
system proved to operate efficiently and stably for small-scale extrusion purposes.