Pengaruh Suhu Sintering Terhadap Kemurnian Hidroksiapatit Berbahan Dasar Tulang Ikan Bandeng (Chanos-Chanos) Dengan Metode Sol – Gel
Effect of Sintering Temperature on Purity of Milkfish Bones-Based Hydroxyapatite (Chanos-Chanos) by Sole-Gel Method
Kerusakan (fraktur) maupun kelainan pada tulang mengakibatkan kecacatan struktur dan terganggunya fungsi tubuh. Dengan begitu tulang membutuhkan perbaikan agar dapat mengembalikan fungsi tulang dengan normal. Biomaterial merupakan material sintesis yang bekerja dengan cara kontak langsung jaringan hidup dan mampu untuk melakukan interaksi sistem biologis manusia. Biokeramik dapat disintesis dari bahan yang memiliki kandungan kalsium, seperti cangkang telur ayam ras, tulang ikan, cangkang kerang, dan cangkang telur. Salah satu bahan yang berpotensi sebagai bahan biokeramik yang mudah didapat adalah Tulang Ikan Bandeng. Salah satu biomaterial yang dapat digunakan untuk perbaikan tulang yang mengalami fraktur adalah hidroksiapatit. Dalam proses hidroksiapatit dapat dilakukan dengan berbagai metode seperti halnya metode kering, metode sol gel, hidrotermal, dan metode pengendapan basah.
Pada penelitian saat ini menggunakan metode sol-gel dan sumber kalsium yang dipakai adalah Tulang Ikan Bandeng. Suhu sintering sangat memengaruhi kualitas hidroksiapatit. Pada penelitian ini hidroksiapatit dilakukan proses kalsinasi pada suhu 900°C selama 5 jam. Lalu di lakukan sintering selama 6 jam dengan variasi suhu 800°C, 900°C, dan 1000°C. Hasil dari sintetis tersebut akan di karakterisasi menggunakan X-Ray Diffractometer (XRD) dan dapat diketahui fasanya sedangkan Scanning Electron Microscope (SEM) untuk diuji penentuan morfologinya.
Diperoleh variasi suhu sintering pada proses sol-gel memiliki pengaruh terhadap tingkat kemurnian dan kristalinitas hidroksiapatit yang dihasilkan. Dari uji XRD sample dengan variasi suhu 1000°C memiliki tingkat kemurnian 84,4%, dengan kristalinitas sebesar 96,85%. bentuk morfologi yang di dapat, dalam penelitian ini hasil uji SEM menunjukkan bentuk morfologi granular yang beragam dan merapatnya antar partikel seiring. meningkatnya variasi suhu, Bentuk terbaik dan juga kerapatan antar partikel terbaik terjadi pada sample dengan variasi suhu 1000°C.
Kata Kunci : Hidroksiapatit, Metode Sol-gel, Tulang ikan Bandeng
Damage (fractures) and abnormalities in bones result in structural defects and disruption of body functions. That way, the bones need repair in order to restore normal bone function. Biomaterials are synthetic materials that work by direct contact with living tissues and are able to interact with human biological systems. Bioceramics can be synthesized from materials that contain calcium, such as purebred chicken eggshells, fish bones, shells, and eggshells. One of the materials that has the potential to be a bioceramic material that is easy to get is Milkfish Bones. One of the biomaterials that can be used for the repair of fractured bones is hydroxyyapatite. In the hydroxyapatite process, it can be done by various methods such as the dry method, gel sole method, hydrothermal, and wet deposition method
n the current study, the sol-gel method is used and the source of calcium used is milkfish bones. The sintering temperature greatly affects the quality of hydroxyapatite. In this study, hydroxyyapatite was carried out a calcination process at 900°C for 5 hours. Then sintering was carried out for 6 hours with temperature variations of 800°C, 900°C, and 1000°C. The results of the synthetic will be characterized using X-Ray Diffractometer (XRD) and can be known the phase while the Scanning Electron Microscope (SEM) is to be tested for morphology.
It is obtained that the variation in sintering temperature in the sol-gel process has an influence on the purity level and crystallinity of the hydroxyapatite produced. From the XRD test, the sample with a temperature variation of 1000°C has a purity level of 84.4%, with a crystallinity of 96.85%. The morphological form obtained, in this study the results of the SEM test show a variety of granular morphological shapes and their closeness between the parallel particles. increased temperature variation, the best shape and also the best density between particles occurs in samples with a temperature variation of 1000°C.
Kata Kunci : Hydroxyapatite, Sol-gel Method, Milkfish Bones