Pengendalian Suhu Air Nutrisi Pada Hidroponik NFT (Nutrient Film Technique) Berbasis Fuzzy Logic Controller
Nutrient Water Temperature Control in Hydroponics NFT (Nutrient Film Technique) Based on Fuzzy Logic Controller
Hidroponik ialah sebuah sistem pertanian dengan memanfaatkan air sebagai media tumbuh tanaman. Salah satu faktor penting dalam sistem hidroponik adalah air, karena air merupakan sumber hara bagi tanaman. Pada penelitian ini menggunakan kontroler logika Fuzzy untuk menstabilkan suhu air hidroponik yang bertujuan agar suhu air tetap terjaga pada tingkat suhu yang baik untuk tanaman. Suhu air yang baik untuk tanaman yaitu berkisar 25̊C sampai 28̊C, sehingga pada penelitian ini menggunakan setpoint 25̊C sampai 28̊C. Pada penelitian ini akan dilakukan dua percobaan yaitu yang pertama percobaan alat tanpa kontrol dan percobaan yang kedua menggunakan kontrol. Hasil dari kedua percobaan tersebut nantinya akan dianalisa kemudian akan dibandingkan. Berdasarkan hasil percobaan dengan kontrol dan tanpa kontrol diperoleh hasil bahwa suhu air lebih cepat turun atau stabil jika menggunakan kontrol. Sebab, ketika menggunakan kontroler maka peltier akan bekerja lebih optimal untuk menurunkan suhu air hidroponik. Dari percobaan ini grafik respon sistem perubahan suhu air hidroponik menurun mendekati setpoint, karena ketika setpoint tercapai maka alat akan otomatis berhenti bekerja.
Kata Kunci: Hidroponik, Suhu Air, Fuzzy Kontroler.
Hydroponics is an agricultural system that uses water as a medium for growing plants. One of the important factors in a hydroponic system is water, because water is a source of nutrients for plants. In this study using a fuzzy logic controller to stabilize the hydroponic water temperature, which aims to maintain the water temperature at a temperature level that is good for plants. A good water temperature for plants is in the range of 25̊C to 28̊C, so this study used a setpoint of 25̊C to 28̊C. In this study, two experiments will be carried out, the first is an experiment without a control device and the second is an experiment using a control. The results of the two experiments will be analyzed and then compared. Based on the experimental results with control and without control, it is found that the water temperature drops faster or is stable when using the control. Because, when using a controller, the Peltier will work more optimally to lower the hydroponic water temperature. From this experiment, the response graph of the hydroponic water temperature change system decreases to near the setpoint, because when the setpoint is reached, the tool will automatically stop working.
Keywords: Hydroponic, Water Temperature, Controler Fuzzy.